sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unité | Valeur |
|---|---|---|
| UNITÉ D'INJECTION | ||
| Volume de tir | cm3 | 475 |
| Poids du tir | g | 432 |
| Vitesse de tir | mm/s | 400 |
| Diamètre de la vis | mm | 55 |
| Pression d'injection | MPa | 200 |
| Rapport L:D de vis | -- | 25.3:1 |
| UNITÉ DE SERRAGE | ||
| Force de serrage | kN | 3680 |
| Coup d'ouverture | mm | 640 |
| Espace entre les barres de liaison | mm x mm | 670 x 650 |
| Épaisseur du moule(min) | mm | 270 |
| Épaisseur du moule(max) | mm | 670 |
| Course d'éjection hydraulique | mm | 100 |
| Force d'éjection hydraulique | kN | 77 |
| UNITÉ DE PUISSANCE | ||
| Moteur de pompe | kW | 90 |
| Capacité de chauffage | kW | 28.5 |
| GÉNÉRAL | ||
| Capacité du réservoir d'huile | L | 420 |
Robot Installation
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 1900 mm |
| B | 7192 mm |
| C | 7417 mm |
| D | 2366 mm |
| E | 1808 mm |
Why it's not recommended to have an IML solution with more than 4 cavities for containers which request a wrap+bottom labeling?
For an IML container which request a wrap + bottom labeling will need 2 labels and request a reverse injection technology. With two labels means that there would be 2 sets of magazines and mandrel to stock and pick the labels for the containers. A four cavities design of the mold there would be sufficient space in the IML robot to fit in the extra magazines, but for more cavities mold design the size of the magazine will exceed the limit of the IML robot and will reduce the efficiency of the robot. It would not be an ideal solutions for Wrap + Bottom IML Solutions
Actualités sur l'automatisation de l'injection à chaud
E-mail: sales@switek.biz
Contacter le blogueur
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
