sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unité | Valeur |
|---|---|---|
| UNITÉ D'INJECTION | ||
| Volume de tir | cm3 | 2496 |
| Poids du tir | g | 2271 |
| Vitesse de tir | mm/s | 716 |
| Diamètre de la vis | mm | 85 |
| Pression d'injection | MPa | 204 |
| Rapport L:D de vis | -- | 24 |
| UNITÉ DE SERRAGE | ||
| Force de serrage | kN | 7500 |
| Coup d'ouverture | mm | 1400 |
| Espace entre les barres de liaison | mm x mm | 1150 x 980 |
| Épaisseur du moule(min) | mm | 450 |
| Épaisseur du moule(max) | mm | 1050 |
| Course d'éjection hydraulique | mm | 300 |
| Force d'éjection hydraulique | kN | 260 |
| UNITÉ DE PUISSANCE | ||
| Moteur de pompe | kW | 144 |
| Capacité de chauffage | kW | 41 |
| GÉNÉRAL | ||
| Capacité du réservoir d'huile | L | 1250 |
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 2892 mm |
| B | 1452 mm |
| C | 1440 mm |
| D | 1377 mm |
| E | 1377 mm |
| F | 1850 mm |
| G | 1400 mm |
| H | 1498 mm |
| I | 2240 mm |
| J | 1500 mm |
| K | 1730 mm |
| L | 2385 mm |
| M | 2199 mm |
| N | 2170 mm |
Will Hybrid An Ideal Injection Molding Machine for IML Project?
Hybrid injection molding machine, a combination of the all electric injection molding machine and the hydraulic injection molding machine, it's no doubt one of the best injection molding machine for your IML project. A hybrid injection molding machine will have the precision of plastic injection also the much lower cost against the all electric injection molding machine.
One of the best buy hybrid injection molding machine made in China is the LDY series of hybrid injection molding machine made by Haida, one of the injection molding machine manufacturer founded in 1992 and is famous for the reliability of the injection molding machines. The LDY series of hybrid injection molding machine is their key products for thin-wall container production markets with a clamping force ranging from 100~420T.
For your IML project, the best IML robot to match Haida LDY series hybrid injection molding machine would be SWITEK SW8 Series IML robot, with control systems by European system provider SigmaTek, the cycle time of SW8 series of IML robot can reach 2.0s for the IML production of small size thin-wall containers or lids. It's one of the fastest IML robot made in China.
Actualités sur l'automatisation de l'injection à chaud
E-mail: sales@switek.biz
Contacter le blogueur
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
