sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unité | Valeur |
|---|---|---|
| UNITÉ D'INJECTION | ||
| Volume de tir | cm3 | 8467 |
| Poids du tir | g | 7705 |
| Vitesse de tir | mm/s | 1497 |
| Diamètre de la vis | mm | 140 |
| Pression d'injection | MPa | 117 |
| Rapport L:D de vis | -- | 20.6 |
| UNITÉ DE SERRAGE | ||
| Force de serrage | kN | 10800 |
| Coup d'ouverture | mm | 1900 |
| Espace entre les barres de liaison | mm x mm | 1260 x 1100 |
| Épaisseur du moule(min) | mm | 500 |
| Épaisseur du moule(max) | mm | 1200 |
| Course d'éjection hydraulique | mm | 350 |
| Force d'éjection hydraulique | kN | 230 |
| UNITÉ DE PUISSANCE | ||
| Moteur de pompe | kW | 130 |
| Capacité de chauffage | kW | 104 |
| GÉNÉRAL | ||
| Capacité du réservoir d'huile | L | 1250 |
Clamping Unit
Platen Dimensions
Robot
Front View
Top View
Side View
| # | Value |
|---|---|
| A | 2470 mm |
| B | 2351 mm |
| C | 4180 mm |
| D | 2250 mm |
| E | 1676 mm |
| F | 1625 mm |
| G | 1318 mm |
| H | 1212 mm |
| I | 544 mm |
| J | 4699 mm |
| K | 4913 mm |
| M | 4014 mm |
| N | 1840 |
Why it's not recommended to have an IML solution with more than 4 cavities for containers which request a wrap+bottom labeling?
For an IML container which request a wrap + bottom labeling will need 2 labels and request a reverse injection technology. With two labels means that there would be 2 sets of magazines and mandrel to stock and pick the labels for the containers. A four cavities design of the mold there would be sufficient space in the IML robot to fit in the extra magazines, but for more cavities mold design the size of the magazine will exceed the limit of the IML robot and will reduce the efficiency of the robot. It would not be an ideal solutions for Wrap + Bottom IML Solutions
Actualités sur l'automatisation de l'injection à chaud
E-mail: sales@switek.biz
Contacter le blogueur
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
