Machine de moulage par injection

JU7500III - 6730C Twoplaten Machine de moulage par injection

Spécification de la machine

Description	Unité	Valeur
UNITÉ D'INJECTION
Volume de tir	cm³	4467
Poids du tir	g	4065
Vitesse de tir	mm/s	960
Diamètre de la vis	mm	110
Pression d'injection	MPa	129
Rapport L:D de vis	--	20
UNITÉ DE SERRAGE
Force de serrage	kN	7500
Coup d'ouverture	mm	1400
Espace entre les barres de liaison	mm x mm	1110 x 960
Épaisseur du moule(min)	mm	450
Épaisseur du moule(max)	mm	950
Course d'éjection hydraulique	mm	300
Force d'éjection hydraulique	kN	195
UNITÉ DE PUISSANCE
Moteur de pompe	kW	85
Capacité de chauffage	kW	71
GÉNÉRAL
Capacité du réservoir d'huile	L	780

Dimensions de la machine

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2208 mm
B	2106 mm
C	2700 mm
D	2200 mm
E	1506 mm
F	1354 mm
G	1198 mm
H	1042 mm
I	544 mm
J	4055 mm
K	4689 mm
M	3450 mm
N	1607

Q & A

Why There's An Additional Static Charge Ring Installed to Some IML System?

For visitors of SWITEKK website will find that for the IML system no matter if it's side entry IML robot or Top Entry IML Robot, you can see a ring just outside the mold area in some of the IML system but not to the other IML system. Why would it happen and what's the function of this ring to the IML system?

The ring installed is a static charging ring. For a better understanding of the function of this static charging ring we'll need to know the types of the labels which we're using in an IML project. For an IML container made from PP (Polypropylene) there're two main types of IML labels, the regular material IML labels which could be easily static charged from the inner side of the label and the metallic label of which has a metallic layer will releas the static immediately. In this case we'll need to have the label static charged from outside of the label. That's why an extra static charging ring is to be installed to the IML system to ensure that the metallic IML label could be well static charged.

For more knowledge about IML and IML solutions just follow up https://www.gechiml.com for the up to date solutions of IML from SWITEK automation and contact Adams for a turn-key solutions of IML.

Actualités sur l'automatisation de l'injection à chaud