sales06@switek.biz
+86 186 5927 5869
Description | Unité | Valeur |
---|---|---|
UNITÉ D'INJECTION | ||
Volume de tir | cm3 | 231 |
Poids du tir | g | 169 |
Vitesse de tir | mm/s | 610 |
Diamètre de la vis | mm | 40 |
Pression d'injection | MPa | 203 |
Rapport L:D de vis | -- | 25 |
UNITÉ DE SERRAGE | ||
Force de serrage | kN | 1600 |
Coup d'ouverture | mm | 500 |
Espace entre les barres de liaison | mm x mm | 520 x 520 |
Épaisseur du moule(min) | mm | 275 |
Épaisseur du moule(max) | mm | 585 |
Course d'éjection hydraulique | mm | 160 |
Force d'éjection hydraulique | kN | 59 |
UNITÉ DE PUISSANCE | ||
Moteur de pompe | kW | 81 |
Capacité de chauffage | kW | 13.9 |
GÉNÉRAL | ||
Capacité du réservoir d'huile | L | 380 |
Platen Dimension
Machine Dimmension
# | Value |
---|---|
A | 156 mm |
B | -14 mm |
C | 992 mm |
D Max | 1625 mm |
G | 2064 mm |
M | 5398 mm |
F Min | 887 mm |
S | 237 mm |
SH | 1151 mm |
For vision control system for IML containers, what's the advantages and disadvantages of the open type of vision control system?
Vision control is now a very important in IML system especially the IML solutions for dairy products packages like yogurt cups, butter cups etc. For most European IML solutions providers like BRINK that they'll choose an open type of Vision control system which will check if the containers are well labeled or not immediately after the containers picked out from the mold and have them re-stacked after the vision control. This kind of solution will help to increase the efficiency of the IML System and pick out the defect parts quickly.
But, for some minor defect like dirt it would be impossible to be checked out because the precision of the cameras would be influenced by the changing light of the environment. To solve this problem the updated solution would be to have the IML containers checked in a closed light box which will creat a stable environment to the camera to minimize the misjudgement of the good and non good parts. -- SWITEK Yogurt Cups Vision Control Solution
Actualités sur l'automatisation de l'injection à chaud
E-mail: sales@switek.biz
Contacter le blogueur
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China