1000 SEIII B -- Welltec Machinery Ltd.

Description	Unit	Value
Shot volume	cm³	6013
Shot weight	g	5412
Shot speed	mm/s	490
Screw diameter	mm	125
Injection pressure	MPa	134
Screw L:D ratio	--	17.7
CLAMPING UNIT
Clamping force	kN	10000
Opening Stroke	mm	1150
Space between tie bars	mm x mm	1100 x 1100
Mold thickness(min)	mm	450
Mold thickness(max)	mm	1150
Hydraulic ejection stroke	mm	350
Hydraulic ejection force	kN	250
POWER UNIT
Pump motor	kW	440
Heating capacity	kW	58
GENERAL
Oil tank capacity	L	1600

Description

Unit

Value

INJECTION UNIT

Shot volume

cm³

6013

Shot weight

5412

Shot speed

mm/s

490

Screw diameter

125

Injection pressure

MPa

134

Screw L:D ratio

17.7

CLAMPING UNIT

Clamping force

10000

Opening Stroke

1150

Space between tie bars

mm x mm

1100 x 1100

Mold thickness(min)

450

Mold thickness(max)

1150

Hydraulic ejection stroke

350

Hydraulic ejection force

250

POWER UNIT

Pump motor

440

Heating capacity

GENERAL

Oil tank capacity

1600

#	Value
A	2687 mm
B	2370 mm
C	2717 mm
D	4904 mm
E	4900 mm
F	11090 mm
G	1482 mm
H	2569 mm

Value

2687 mm

2370 mm

2717 mm

4904 mm

4900 mm

11090 mm

1482 mm

2569 mm

Q & A

Why is HMD270M8SPV One of the Best High Speed Hydraulic Injection Molding Machine for Small Size Containers IML Production?

As one of the best buy high speed hydraulic injection molding machine for thin-wall containers made in China, HMD270M8SPV is no doubt one an excellent injection molding machine for thin-wall containers high speed production. As the star injection molding machine by HMD group, HMD270M8SPV has the advangates below:

Improved platen with high rigidity structure, especially suitable for thin-wall containers IML production.
Parallel movement and high-speed/low pressure injection movement that shortens circle time, especially for thin wall products IML production.
High-speed hydraulic motor.
Opening stroke up to 560mm, suitable for the IML productions of containers with height up to 136mm.
Injection speed up to 368mm/s, with possible of a cycle time of IML production lower to 2s.

To match the excellent injection speed of HMD270M8SPV, the best IML robot would be SWITEK high speed side entry IML Robot SW833, with the control system by the European automation control system supplier SigmaTek, the dry cycle time of the IML robot can be lower than 2.1s, which will perfecctly match the productivity of HMD270M8SPV.

1000SEIII - C servo Injection Molding Machine

Machine Specification

Machine Dimension

Q & A