switek email

sales06@switek.biz

switek whatsapp

+86 186 5927 5869

1250SEIII - A servo Injection Molding Machine
Machine Specification
Description Unit Value
INJECTION UNIT
Shot volume cm3 5293
Shot weight g 4764
Shot speed mm/s 557
Screw diameter mm 110
Injection pressure MPa 233
Screw L:D ratio -- 21.6
CLAMPING UNIT
Clamping force kN 12500
Opening Stroke mm 1300
Space between tie bars mm x mm 1250 x 1250
Mold thickness(min) mm 500
Mold thickness(max) mm 1300
Hydraulic ejection stroke mm 350
Hydraulic ejection force kN 250
POWER UNIT
Pump motor kW 550
Heating capacity kW 74
GENERAL
Oil tank capacity L 1600
Machine Dimension

Platen Dimension

Machine Dimmension

# Value
A 2867 mm
B 2530 mm
C 2853 mm
D 5485 mm
E 5060 mm
F 12149 mm
G 1482 mm
H 2812 mm
Q & A

YIZUMI P350 or P380K3, which one would be a better choice for your IML project?

P350 is a high speed injection molding machine designed for thin-wall containers while P380K3 is the third generation of high speed injection molding machine by YIZUMI designed for thin-wall containers. With 30 Tons more in clamping force, does it mean that P380K3 will compatible to the molds designed according to the parameters of P350?

In one just finished IML project we encountered something embrassing. There's one mold designed according to the parameter of YIZUMI P350, and we have a P380K3 in our system testing workshop, but when the mold received we find that the mold thinkness exceeded the max mold thickness of the P380K3. After double check the parameters of both the injection molding machine we found that Mold thickness allowed for P350 is 300~750mm while the mold thickness for P380K3 is only 250~650mm. And the Max Daylight of P380K3 is 160mm less than P350.

Then how to choose between, which one would be a better choice for your IML project? It would be depends on the size of the parts of which you're producing. For smaller container 30 Tons more clamping force with 160mm less max daylight means that the injection molding machine will have a less mold Open/Close time and result in a higher productivity while for larger size containers P350 will allow you to install a thicker mold, it would be more friendly to an IML project of deep cavity containers.

For more insights of the cutting edge IML technology please feel free to contact Adams from SWITEK, your personal consultant of IML Solutions.


Inquiry Now
Submit

WhatsApp

WeChat

E-mail: sales@switek.biz