1250 SEIII C -- Welltec Machinery Ltd.

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	8574
Shot weight	g	7717
Shot speed	mm/s	557
Screw diameter	mm	140
Injection pressure	MPa	144
Screw L:D ratio	--	18.5
CLAMPING UNIT
Clamping force	kN	12500
Opening Stroke	mm	1300
Space between tie bars	mm x mm	1250 x 1250
Mold thickness(min)	mm	500
Mold thickness(max)	mm	1300
Hydraulic ejection stroke	mm	350
Hydraulic ejection force	kN	250
POWER UNIT
Pump motor	kW	550
Heating capacity	kW	74
GENERAL
Oil tank capacity	L	1600

Platen Dimension

Machine Dimmension

#	Value
A	2867 mm
B	2530 mm
C	2853 mm
D	5485 mm
E	5060 mm
F	12149 mm
G	1482 mm
H	2812 mm

SWITEK finished the in house testing of two cavities juice extractor cover top entry IML system for the production of juice extractor covery by the technology of IML.

The new system is an economic solution for thick wall products IML production. With SWITEK 3 axis servo injection robot SW7312DS as the core injection robot to finish the process of label picking, insertion, parts picking, the cost of the top entry IML solutions is much lower than its side entry counter parts.

The tips for a top entry IML solutions:

To ensure that the robot has sufficient payload, it's the core of a stable IML system
To ensure that the mould design is friendly to IML production. The mould structure for IML is different from the mould for parts of non-IML, an excellent mould design is the key to a successful IML system.
A top entry IML system is only suitable for a low speed system. Because a top entry IML system request that the 3 axis servo robot to do all the label picking, inserting, parts picking and droping of an IML system, it'll request a much longer in mold time compared to its counter part.

Turn-key IML Solutions