Servo Hydraulic Injection Molding Machine 130SEIII -- Welltec Machinery Ltd.

Description	Unit	Value
Shot volume	cm³	251
Shot weight	g	229
Shot speed	mm/s	205
Screw diameter	mm	40
Injection pressure	MPa	172
Screw L:D ratio	--	20.5
CLAMPING UNIT
Clamping force	kN	1300
Opening Stroke	mm	430
Space between tie bars	mm x mm	410 x 410
Mold thickness(min)	mm	145
Mold thickness(max)	mm	450
Hydraulic ejection stroke	mm	120
Hydraulic ejection force	kN	41
POWER UNIT
Pump motor	kW	72
Heating capacity	kW	9.3
GENERAL
Oil tank capacity	L	200

Description

Unit

Value

INJECTION UNIT

Shot volume

cm³

251

Shot weight

229

Shot speed

mm/s

205

Screw diameter

Injection pressure

MPa

172

Screw L:D ratio

20.5

CLAMPING UNIT

Clamping force

1300

Opening Stroke

430

Space between tie bars

mm x mm

410 x 410

Mold thickness(min)

145

Mold thickness(max)

450

Hydraulic ejection stroke

120

Hydraulic ejection force

POWER UNIT

Pump motor

Heating capacity

9.3

GENERAL

Oil tank capacity

200

#	Value
A	1700 mm
B	1486 mm
C	1936 mm
D	3878 mm
E	4586 mm
F	1104 mm
G	1203 mm
H	650 mm
I	800 mm
J	660 mm
K	601.5 mm

Value

1700 mm

1486 mm

1936 mm

3878 mm

4586 mm

1104 mm

1203 mm

650 mm

800 mm

660 mm

601.5 mm

Q & A

Why is HMD270M8SPV One of the Best High Speed Hydraulic Injection Molding Machine for Small Size Containers IML Production?

As one of the best buy high speed hydraulic injection molding machine for thin-wall containers made in China, HMD270M8SPV is no doubt one an excellent injection molding machine for thin-wall containers high speed production. As the star injection molding machine by HMD group, HMD270M8SPV has the advangates below:

Improved platen with high rigidity structure, especially suitable for thin-wall containers IML production.
Parallel movement and high-speed/low pressure injection movement that shortens circle time, especially for thin wall products IML production.
High-speed hydraulic motor.
Opening stroke up to 560mm, suitable for the IML productions of containers with height up to 136mm.
Injection speed up to 368mm/s, with possible of a cycle time of IML production lower to 2s.

To match the excellent injection speed of HMD270M8SPV, the best IML robot would be SWITEK high speed side entry IML Robot SW833, with the control system by the European automation control system supplier SigmaTek, the dry cycle time of the IML robot can be lower than 2.1s, which will perfecctly match the productivity of HMD270M8SPV.

130SEIII-B servo Injection Molding Machine

Machine Specification

Machine Dimension

Q & A