1500 SEIII C -- Welltec Machinery Ltd.

Description	Unit	Value
Shot volume	cm³	10651
Shot weight	g	9586
Shot speed	mm/s	645
Screw diameter	mm	145
Injection pressure	MPa	162
Screw L:D ratio	--	19.7
CLAMPING UNIT
Clamping force	kN	15000
Opening Stroke	mm	1500
Space between tie bars	mm x mm	1400 x 1400
Mold thickness(min)	mm	600
Mold thickness(max)	mm	1400
Hydraulic ejection stroke	mm	350
Hydraulic ejection force	kN	330
POWER UNIT
Pump motor	kW	550
Heating capacity	kW	92
GENERAL
Oil tank capacity	L	2000

Description

Unit

Value

INJECTION UNIT

Shot volume

cm³

10651

Shot weight

9586

Shot speed

mm/s

645

Screw diameter

145

Injection pressure

MPa

162

Screw L:D ratio

19.7

CLAMPING UNIT

Clamping force

15000

Opening Stroke

1500

Space between tie bars

mm x mm

1400 x 1400

Mold thickness(min)

600

Mold thickness(max)

1400

Hydraulic ejection stroke

350

Hydraulic ejection force

330

POWER UNIT

Pump motor

550

Heating capacity

GENERAL

Oil tank capacity

2000

#	Value
A	2808 mm
B	2700 mm
C	3200 mm
D	6158 mm
E	5360 mm
F	13290 mm
G	1340 mm
H	2971 mm

Value

2808 mm

2700 mm

3200 mm

6158 mm

5360 mm

13290 mm

1340 mm

2971 mm

Q & A

Why is HMD270M8SPV One of the Best High Speed Hydraulic Injection Molding Machine for Small Size Containers IML Production?

As one of the best buy high speed hydraulic injection molding machine for thin-wall containers made in China, HMD270M8SPV is no doubt one an excellent injection molding machine for thin-wall containers high speed production. As the star injection molding machine by HMD group, HMD270M8SPV has the advangates below:

Improved platen with high rigidity structure, especially suitable for thin-wall containers IML production.
Parallel movement and high-speed/low pressure injection movement that shortens circle time, especially for thin wall products IML production.
High-speed hydraulic motor.
Opening stroke up to 560mm, suitable for the IML productions of containers with height up to 136mm.
Injection speed up to 368mm/s, with possible of a cycle time of IML production lower to 2s.

To match the excellent injection speed of HMD270M8SPV, the best IML robot would be SWITEK high speed side entry IML Robot SW833, with the control system by the European automation control system supplier SigmaTek, the dry cycle time of the IML robot can be lower than 2.1s, which will perfecctly match the productivity of HMD270M8SPV.

1500SEIII - C servo Injection Molding Machine

Machine Specification

Machine Dimension

Q & A