1500 SEIII B -- Welltec Machinery Ltd.

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	9232
Shot weight	g	8309
Shot speed	mm/s	645
Screw diameter	mm	135
Injection pressure	MPa	187
Screw L:D ratio	--	21.1
CLAMPING UNIT
Clamping force	kN	15000
Opening Stroke	mm	1500
Space between tie bars	mm x mm	1400 x 1400
Mold thickness(min)	mm	600
Mold thickness(max)	mm	1400
Hydraulic ejection stroke	mm	350
Hydraulic ejection force	kN	330
POWER UNIT
Pump motor	kW	550
Heating capacity	kW	92
GENERAL
Oil tank capacity	L	2000

Platen Dimension

Machine Dimmension

#	Value
A	2808 mm
B	2700 mm
C	3200 mm
D	6158 mm
E	5360 mm
F	13290 mm
G	1340 mm
H	2971 mm

Roboplas onshow 2 cavities 1.2 litter buckets side entry IML Solutions with handle assembly at Fakuma 2017.

The globalized increasing of the labour cost make it more and more difficult to make profit for low value added prarts producing. Automation of the production process would be the best way. It's no doubt that to have the handles assembled immediately after the buckets IML produced will increase the production efficiency dramatically. The Roboplas 2 Cavitites buckets IML solutions with handle assembly for sure is an ideal choice for the buckets producers.

As for similar project of a smaller budget, the IML containers can consider a turn-key system made in China. With a complete supplier chain in China and much lower labour cost compared to their European counter parts, SWITEK IML Solutions will provide a system with the cost of only around 35%~45% of their European counter parts and life long online technical support. With a turn-key solution, the mould and the IML automation system would be well tested in China before delivery to ensure that you'll receive a system of buckets IML production with handle assembly ready to work.

Turn-key IML Solutions