sales06@switek.biz
+86 186 5927 5869
Description | Unit | Value |
---|---|---|
INJECTION UNIT | ||
Shot volume | cm3 | 12969 |
Shot weight | g | 11672 |
Shot speed | mm/s | 645 |
Screw diameter | mm | 160 |
Injection pressure | MPa | 133 |
Screw L:D ratio | -- | 17.8 |
CLAMPING UNIT | ||
Clamping force | kN | 18000 |
Opening Stroke | mm | 1800 |
Space between tie bars | mm x mm | 1600 x 1400 |
Mold thickness(min) | mm | 700 |
Mold thickness(max) | mm | 1500 |
Hydraulic ejection stroke | mm | 380 |
Hydraulic ejection force | kN | 330 |
POWER UNIT | ||
Pump motor | kW | 715 |
Heating capacity | kW | 92 |
GENERAL | ||
Oil tank capacity | L | 2000 |
Platen Dimension
Machine Dimmension
# | Value |
---|---|
A | 2808 mm |
B | 2720 mm |
C | 3200 mm |
D | 6340 mm |
E | 5360 mm |
F | 13439 mm |
G | 1340 mm |
H | 3210 mm |
For a Container with a Height of 100mm, What Would be the Minimal Opening Stroke of the Injection Molding Machine?
As we know, for the IML production of a container, the robot will do the actions of parts picking and label inserting in the mold, which means that the system will request a much larger in mold space compared to non-IML production. While selecting an injection molding machine for your IML project, the opening stroke of the injection molding machine would be a very important parameter to be taken into consideration. The basic formular for the opening stoke caculation would be heigh of the parts x 3 + 150mm, the potential injection molding machine must have a larger opening stroke, or the robot may not able to pick the parts and insert the labels symtaneously.
Hot Injection Automation News
E-mail: sales@switek.biz
Contact Blogger
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China