Servo Hydraulic Injection Molding Machine 200 SEIII C -- Welltec Machinery Ltd.

Description	Unit	Value
Shot volume	cm³	707
Shot weight	g	643
Shot speed	mm/s	185
Screw diameter	mm	60
Injection pressure	MPa	177
Screw L:D ratio	--	18
CLAMPING UNIT
Clamping force	kN	2000
Opening Stroke	mm	540
Space between tie bars	mm x mm	535 x 535
Mold thickness(min)	mm	175
Mold thickness(max)	mm	550
Hydraulic ejection stroke	mm	170
Hydraulic ejection force	kN	99
POWER UNIT
Pump motor	kW	113
Heating capacity	kW	14.25
GENERAL
Oil tank capacity	L	360

Description

Unit

Value

INJECTION UNIT

Shot volume

cm³

707

Shot weight

643

Shot speed

mm/s

185

Screw diameter

Injection pressure

MPa

177

Screw L:D ratio

CLAMPING UNIT

Clamping force

2000

Opening Stroke

540

Space between tie bars

mm x mm

535 x 535

Mold thickness(min)

175

Mold thickness(max)

550

Hydraulic ejection stroke

170

Hydraulic ejection force

POWER UNIT

Pump motor

113

Heating capacity

14.25

GENERAL

Oil tank capacity

360

#	Value
A	1833 mm
B	1645 mm
C	2103 mm
D	4753 mm
E	5598 mm
F	1364 mm
G	1414 mm
H	752 mm
I	800 mm
J	824 mm
K	707 mm

Value

1833 mm

1645 mm

2103 mm

4753 mm

5598 mm

1364 mm

1414 mm

752 mm

800 mm

824 mm

707 mm

Q & A

Why is HMD270M8SPV One of the Best High Speed Hydraulic Injection Molding Machine for Small Size Containers IML Production?

As one of the best buy high speed hydraulic injection molding machine for thin-wall containers made in China, HMD270M8SPV is no doubt one an excellent injection molding machine for thin-wall containers high speed production. As the star injection molding machine by HMD group, HMD270M8SPV has the advangates below:

Improved platen with high rigidity structure, especially suitable for thin-wall containers IML production.
Parallel movement and high-speed/low pressure injection movement that shortens circle time, especially for thin wall products IML production.
High-speed hydraulic motor.
Opening stroke up to 560mm, suitable for the IML productions of containers with height up to 136mm.
Injection speed up to 368mm/s, with possible of a cycle time of IML production lower to 2s.

To match the excellent injection speed of HMD270M8SPV, the best IML robot would be SWITEK high speed side entry IML Robot SW833, with the control system by the European automation control system supplier SigmaTek, the dry cycle time of the IML robot can be lower than 2.1s, which will perfecctly match the productivity of HMD270M8SPV.

200SEIII - C servo Injection Molding Machine

Machine Specification

Machine Dimension

Q & A