sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 18576 |
| Shot weight | g | 16719 |
| Shot speed | mm/s | 730 |
| Screw diameter | mm | 180 |
| Injection pressure | MPa | 134 |
| Screw L:D ratio | -- | 19.5 |
| CLAMPING UNIT | ||
| Clamping force | kN | 22000 |
| Opening Stroke | mm | 2200 |
| Space between tie bars | mm x mm | 1800 x 1600 |
| Mold thickness(min) | mm | 900 |
| Mold thickness(max) | mm | 1800 |
| Hydraulic ejection stroke | mm | 450 |
| Hydraulic ejection force | kN | 390 |
| POWER UNIT | ||
| Pump motor | kW | 825 |
| Heating capacity | kW | 123 |
| GENERAL | ||
| Oil tank capacity | L | 2000 |
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 3267 mm |
| B | 3240 mm |
| C | 3580 mm |
| D | 7675 mm |
| E | 7298 mm |
| F | 16724 mm |
| G | 1555 mm |
| H | 4085 mm |
Arburg show cased its all electric injection molding machine "ULTIMATE ALL AROUNDER 720A" with a 4 cavities thin-wall cups IML solution at the total cycle time of 3.95second.
The new all electric packaging machine can produce IML thin-wall cups with a wall thickness of just 0.37 millimetres. Besides this, a variety of new technic applied to the new system. Driven with all-electric and working in combination with injection compression moulding, the energy footprint could be improved by 20 percent and the component weight has dropped significantly from 13 to 10.8grams. With the special "next Cycle IML" technology, the label on the IML product can be completely separated from the cup's PP during recycling.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
K-Fair 2022, Highlights on Hall 15
Haitian Released its 5th Generation of Two Platen Injection Modling Machine JU5 at Chinaplas 2023
BORCHE is On Showing New All Electric Injection Molding Machine at Chinaplas 2024 Booth#5.1D22
SWITEK Automation New Icecream Cups Lids Auto-production Put in Use
China IML Solution Provider | Acmeplas System Technologies Ltd.
Hwamda Machinery New Two Platen Injection Molding Machine HMD DU2100 Started Up in A Large Size Dustin Project Without Robot
Fakuma 2024 is Opening on 15 October, 2024 at Friedrichshafen, Germany
Chinaplas 2023 News | HMD IML Solutions, Borche Two Platen Injection Molding Machine, LEVEL New Plastic Dryer
Yizumi On Show Their Turn-key 8 Cavities Pipe Fittings Auto-injection Solutions.
BORCHE On Show 660 US Ton Injection Molding Machine at NPE 2024
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right
