sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 713 |
| Shot weight | g | 649 |
| Shot speed | mm/s | 175 |
| Screw diameter | mm | 55 |
| Injection pressure | MPa | 211 |
| Screw L:D ratio | -- | 22.9 |
| CLAMPING UNIT | ||
| Clamping force | kN | 2600 |
| Opening Stroke | mm | 600 |
| Space between tie bars | mm x mm | 580 x 580 |
| Mold thickness(min) | mm | 195 |
| Mold thickness(max) | mm | 610 |
| Hydraulic ejection stroke | mm | 195 |
| Hydraulic ejection force | kN | 111 |
| POWER UNIT | ||
| Pump motor | kW | 172 |
| Heating capacity | kW | 18.9 |
| GENERAL | ||
| Oil tank capacity | L | 480 |
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 1961 mm |
| B | 1757 mm |
| C | 2185 mm |
| D | 5030 mm |
| E | 6072 mm |
| F | 1417 mm |
| G | 1462 mm |
| H | 810 mm |
| I | 800 mm |
| J | 852 mm |
| K | 731 mm |
For vision control system for IML containers, what's the advantages and disadvantages of the open type of vision control system?
Vision control is now a very important in IML system especially the IML solutions for dairy products packages like yogurt cups, butter cups etc. For most European IML solutions providers like BRINK that they'll choose an open type of Vision control system which will check if the containers are well labeled or not immediately after the containers picked out from the mold and have them re-stacked after the vision control. This kind of solution will help to increase the efficiency of the IML System and pick out the defect parts quickly.
But, for some minor defect like dirt it would be impossible to be checked out because the precision of the cameras would be influenced by the changing light of the environment. To solve this problem the updated solution would be to have the IML containers checked in a closed light box which will creat a stable environment to the camera to minimize the misjudgement of the good and non good parts. -- SWITEK Yogurt Cups Vision Control Solution
Hot Injection Automation News
E-mail: sales@switek.biz
Contact Blogger
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
