Servo Hydraulic Injection Molding Machine 260 SEIII C -- Welltec Machinery Ltd.

Description	Unit	Value
Shot volume	cm³	1155
Shot weight	g	1051
Shot speed	mm/s	175
Screw diameter	mm	70
Injection pressure	MPa	134
Screw L:D ratio	--	18
CLAMPING UNIT
Clamping force	kN	2600
Opening Stroke	mm	600
Space between tie bars	mm x mm	580 x 580
Mold thickness(min)	mm	195
Mold thickness(max)	mm	610
Hydraulic ejection stroke	mm	195
Hydraulic ejection force	kN	111
POWER UNIT
Pump motor	kW	172
Heating capacity	kW	18.9
GENERAL
Oil tank capacity	L	480

Description

Unit

Value

INJECTION UNIT

Shot volume

cm³

1155

Shot weight

1051

Shot speed

mm/s

175

Screw diameter

Injection pressure

MPa

134

Screw L:D ratio

CLAMPING UNIT

Clamping force

2600

Opening Stroke

600

Space between tie bars

mm x mm

580 x 580

Mold thickness(min)

195

Mold thickness(max)

610

Hydraulic ejection stroke

195

Hydraulic ejection force

111

POWER UNIT

Pump motor

172

Heating capacity

18.9

GENERAL

Oil tank capacity

480

#	Value
A	1961 mm
B	1757 mm
C	2185 mm
D	5030 mm
E	6072 mm
F	1417 mm
G	1462 mm
H	810 mm
I	800 mm
J	852 mm
K	731 mm

Value

1961 mm

1757 mm

2185 mm

5030 mm

6072 mm

1417 mm

1462 mm

810 mm

800 mm

852 mm

731 mm

Q & A

Why is HMD270M8SPV One of the Best High Speed Hydraulic Injection Molding Machine for Small Size Containers IML Production?

As one of the best buy high speed hydraulic injection molding machine for thin-wall containers made in China, HMD270M8SPV is no doubt one an excellent injection molding machine for thin-wall containers high speed production. As the star injection molding machine by HMD group, HMD270M8SPV has the advangates below:

Improved platen with high rigidity structure, especially suitable for thin-wall containers IML production.
Parallel movement and high-speed/low pressure injection movement that shortens circle time, especially for thin wall products IML production.
High-speed hydraulic motor.
Opening stroke up to 560mm, suitable for the IML productions of containers with height up to 136mm.
Injection speed up to 368mm/s, with possible of a cycle time of IML production lower to 2s.

To match the excellent injection speed of HMD270M8SPV, the best IML robot would be SWITEK high speed side entry IML Robot SW833, with the control system by the European automation control system supplier SigmaTek, the dry cycle time of the IML robot can be lower than 2.1s, which will perfecctly match the productivity of HMD270M8SPV.

260SEIII - C servo Injection Molding Machine

Machine Specification

Machine Dimension

Q & A