Servo Hydraulic Injection Molding Machine 320 SEIII A -- Welltec Machinery Ltd.

Description	Unit	Value
Shot volume	cm³	919
Shot weight	g	836
Shot speed	mm/s	224
Screw diameter	mm	60
Injection pressure	MPa	210
Screw L:D ratio	--	22.5
CLAMPING UNIT
Clamping force	kN	3200
Opening Stroke	mm	700
Space between tie bars	mm x mm	680 x 680
Mold thickness(min)	mm	250
Mold thickness(max)	mm	700
Hydraulic ejection stroke	mm	325
Hydraulic ejection force	kN	91
POWER UNIT
Pump motor	kW	220
Heating capacity	kW	22.15
GENERAL
Oil tank capacity	L	550

Description

Unit

Value

INJECTION UNIT

Shot volume

cm³

919

Shot weight

836

Shot speed

mm/s

224

Screw diameter

Injection pressure

MPa

210

Screw L:D ratio

22.5

CLAMPING UNIT

Clamping force

3200

Opening Stroke

700

Space between tie bars

mm x mm

680 x 680

Mold thickness(min)

250

Mold thickness(max)

700

Hydraulic ejection stroke

325

Hydraulic ejection force

POWER UNIT

Pump motor

220

Heating capacity

22.15

GENERAL

Oil tank capacity

550

#	Value
A	2078 mm
B	1884 mm
C	2267 mm
D	5575 mm
E	6601 mm
F	1517 mm
G	1592 mm
H	865 mm
I	800 mm
J	902 mm
K	796 mm

Value

2078 mm

1884 mm

2267 mm

5575 mm

6601 mm

1517 mm

1592 mm

865 mm

800 mm

902 mm

796 mm

Q & A

Why is HMD270M8SPV One of the Best High Speed Hydraulic Injection Molding Machine for Small Size Containers IML Production?

As one of the best buy high speed hydraulic injection molding machine for thin-wall containers made in China, HMD270M8SPV is no doubt one an excellent injection molding machine for thin-wall containers high speed production. As the star injection molding machine by HMD group, HMD270M8SPV has the advangates below:

Improved platen with high rigidity structure, especially suitable for thin-wall containers IML production.
Parallel movement and high-speed/low pressure injection movement that shortens circle time, especially for thin wall products IML production.
High-speed hydraulic motor.
Opening stroke up to 560mm, suitable for the IML productions of containers with height up to 136mm.
Injection speed up to 368mm/s, with possible of a cycle time of IML production lower to 2s.

To match the excellent injection speed of HMD270M8SPV, the best IML robot would be SWITEK high speed side entry IML Robot SW833, with the control system by the European automation control system supplier SigmaTek, the dry cycle time of the IML robot can be lower than 2.1s, which will perfecctly match the productivity of HMD270M8SPV.

320SEIII - A servo Injection Molding Machine

Machine Specification

Machine Dimension

Q & A