switek email

sales06@switek.biz

switek whatsapp

+86 186 5927 5869

400SEIII - A servo Injection Molding Machine
Machine Specification
Description Unit Value
INJECTION UNIT
Shot volume cm3 1244
Shot weight g 1132
Shot speed mm/s 170
Screw diameter mm 65
Injection pressure MPa 231
Screw L:D ratio -- 23.9
CLAMPING UNIT
Clamping force kN 4000
Opening Stroke mm 780
Space between tie bars mm x mm 740 x 740
Mold thickness(min) mm 250
Mold thickness(max) mm 750
Hydraulic ejection stroke mm 375
Hydraulic ejection force kN 120
POWER UNIT
Pump motor kW 275
Heating capacity kW 28.99
GENERAL
Oil tank capacity L 700
Machine Dimension

Platen Dimension

Machine Dimmension

# Value
A 2176 mm
B 1923 mm
C 2284 mm
D 6780 mm
E 7744 mm
F 1783 mm
G 1760 mm
H 874 mm
I 800 mm
J 909 mm
K 880 mm
Q & A

YIZUMI P350 or P380K3, which one would be a better choice for your IML project?

P350 is a high speed injection molding machine designed for thin-wall containers while P380K3 is the third generation of high speed injection molding machine by YIZUMI designed for thin-wall containers. With 30 Tons more in clamping force, does it mean that P380K3 will compatible to the molds designed according to the parameters of P350?

In one just finished IML project we encountered something embrassing. There's one mold designed according to the parameter of YIZUMI P350, and we have a P380K3 in our system testing workshop, but when the mold received we find that the mold thinkness exceeded the max mold thickness of the P380K3. After double check the parameters of both the injection molding machine we found that Mold thickness allowed for P350 is 300~750mm while the mold thickness for P380K3 is only 250~650mm. And the Max Daylight of P380K3 is 160mm less than P350.

Then how to choose between, which one would be a better choice for your IML project? It would be depends on the size of the parts of which you're producing. For smaller container 30 Tons more clamping force with 160mm less max daylight means that the injection molding machine will have a less mold Open/Close time and result in a higher productivity while for larger size containers P350 will allow you to install a thicker mold, it would be more friendly to an IML project of deep cavity containers.

For more insights of the cutting edge IML technology please feel free to contact Adams from SWITEK, your personal consultant of IML Solutions.


Inquiry Now
Submit

WhatsApp

WeChat

E-mail: sales@switek.biz