480 SEIII C -- Welltec Machinery Ltd.

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	2776
Shot weight	g	2526
Shot speed	mm/s	170
Screw diameter	mm	94
Injection pressure	MPa	126
Screw L:D ratio	--	18
CLAMPING UNIT
Clamping force	kN	4800
Opening Stroke	mm	780
Space between tie bars	mm x mm	820 x 800
Mold thickness(min)	mm	300
Mold thickness(max)	mm	820
Hydraulic ejection stroke	mm	375
Hydraulic ejection force	kN	240
POWER UNIT
Pump motor	kW	166
Heating capacity	kW	35.04
GENERAL
Oil tank capacity	L	700

Platen Dimension

Machine Dimmension

#	Value
A	2246 mm
B	1985 mm
C	2336 mm
D	7006 mm
E	8025 mm
F	1797 mm
G	1874 mm
H	855 mm
I	800 mm
J	942 mm
K	937 mm

Roboplas onshow 2 cavities 1.2 litter buckets side entry IML Solutions with handle assembly at Fakuma 2017.

The globalized increasing of the labour cost make it more and more difficult to make profit for low value added prarts producing. Automation of the production process would be the best way. It's no doubt that to have the handles assembled immediately after the buckets IML produced will increase the production efficiency dramatically. The Roboplas 2 Cavitites buckets IML solutions with handle assembly for sure is an ideal choice for the buckets producers.

As for similar project of a smaller budget, the IML containers can consider a turn-key system made in China. With a complete supplier chain in China and much lower labour cost compared to their European counter parts, SWITEK IML Solutions will provide a system with the cost of only around 35%~45% of their European counter parts and life long online technical support. With a turn-key solution, the mould and the IML automation system would be well tested in China before delivery to ensure that you'll receive a system of buckets IML production with handle assembly ready to work.

Turn-key IML Solutions