660 SEIII C -- Welltec Machinery Ltd.

Description	Unit	Value
Shot volume	cm³	3810
Shot weight	g	3429
Shot speed	mm/s	161
Screw diameter	mm	105
Injection pressure	MPa	125
Screw L:D ratio	--	18
CLAMPING UNIT
Clamping force	kN	6600
Opening Stroke	mm	910
Space between tie bars	mm x mm	920 x 920
Mold thickness(min)	mm	350
Mold thickness(max)	mm	920
Hydraulic ejection stroke	mm	290
Hydraulic ejection force	kN	166
POWER UNIT
Pump motor	kW	385
Heating capacity	kW	35.73
GENERAL
Oil tank capacity	L	1000

Description

Unit

Value

INJECTION UNIT

Shot volume

cm³

3810

Shot weight

3429

Shot speed

mm/s

161

Screw diameter

105

Injection pressure

MPa

125

Screw L:D ratio

CLAMPING UNIT

Clamping force

6600

Opening Stroke

910

Space between tie bars

mm x mm

920 x 920

Mold thickness(min)

350

Mold thickness(max)

920

Hydraulic ejection stroke

290

Hydraulic ejection force

166

POWER UNIT

Pump motor

385

Heating capacity

35.73

GENERAL

Oil tank capacity

1000

#	Value
A	2280 mm
B	2125 mm
C	2545 mm
D	7783 mm
E	9157 mm
F	2193 mm
G	1942 mm
H	1420 mm
I	850 mm
J	960 mm
K	971 mm

Value

2280 mm

2125 mm

2545 mm

7783 mm

9157 mm

2193 mm

1942 mm

1420 mm

850 mm

960 mm

971 mm

Q & A

Why is HMD270M8SPV One of the Best High Speed Hydraulic Injection Molding Machine for Small Size Containers IML Production?

As one of the best buy high speed hydraulic injection molding machine for thin-wall containers made in China, HMD270M8SPV is no doubt one an excellent injection molding machine for thin-wall containers high speed production. As the star injection molding machine by HMD group, HMD270M8SPV has the advangates below:

Improved platen with high rigidity structure, especially suitable for thin-wall containers IML production.
Parallel movement and high-speed/low pressure injection movement that shortens circle time, especially for thin wall products IML production.
High-speed hydraulic motor.
Opening stroke up to 560mm, suitable for the IML productions of containers with height up to 136mm.
Injection speed up to 368mm/s, with possible of a cycle time of IML production lower to 2s.

To match the excellent injection speed of HMD270M8SPV, the best IML robot would be SWITEK high speed side entry IML Robot SW833, with the control system by the European automation control system supplier SigmaTek, the dry cycle time of the IML robot can be lower than 2.1s, which will perfecctly match the productivity of HMD270M8SPV.

660SEIII - C servo Injection Molding Machine

Machine Specification

Machine Dimension

Q & A