High Precision Servo Injection Molding Machine 90SEIII -- Welltec Machinery Ltd.

Description	Unit	Value
Shot volume	cm³	124
Shot weight	g	113
Shot speed	mm/s	237
Screw diameter	mm	30
Injection pressure	MPa	254
Screw L:D ratio	--	24
CLAMPING UNIT
Clamping force	kN	900
Opening Stroke	mm	360
Space between tie bars	mm x mm	360 x 360
Mold thickness(min)	mm	120
Mold thickness(max)	mm	380
Hydraulic ejection stroke	mm	100
Hydraulic ejection force	kN	41
POWER UNIT
Pump motor	kW	72
Heating capacity	kW	7.41
GENERAL
Oil tank capacity	L	200

Description

Unit

Value

INJECTION UNIT

Shot volume

cm³

124

Shot weight

113

Shot speed

mm/s

237

Screw diameter

Injection pressure

MPa

254

Screw L:D ratio

CLAMPING UNIT

Clamping force

900

Opening Stroke

360

Space between tie bars

mm x mm

360 x 360

Mold thickness(min)

120

Mold thickness(max)

380

Hydraulic ejection stroke

100

Hydraulic ejection force

POWER UNIT

Pump motor

Heating capacity

7.41

GENERAL

Oil tank capacity

200

#	Value
A	1615 mm
B	1400 mm
C	1963 mm
D	3560 mm
E	4220 mm
F	1054 mm
G	1152 mm
H	625 mm
I	800 mm
J	635 mm
K	576 mm

Value

1615 mm

1400 mm

1963 mm

3560 mm

4220 mm

1054 mm

1152 mm

625 mm

800 mm

635 mm

576 mm

Q & A

Why is HMD270M8SPV One of the Best High Speed Hydraulic Injection Molding Machine for Small Size Containers IML Production?

As one of the best buy high speed hydraulic injection molding machine for thin-wall containers made in China, HMD270M8SPV is no doubt one an excellent injection molding machine for thin-wall containers high speed production. As the star injection molding machine by HMD group, HMD270M8SPV has the advangates below:

Improved platen with high rigidity structure, especially suitable for thin-wall containers IML production.
Parallel movement and high-speed/low pressure injection movement that shortens circle time, especially for thin wall products IML production.
High-speed hydraulic motor.
Opening stroke up to 560mm, suitable for the IML productions of containers with height up to 136mm.
Injection speed up to 368mm/s, with possible of a cycle time of IML production lower to 2s.

To match the excellent injection speed of HMD270M8SPV, the best IML robot would be SWITEK high speed side entry IML Robot SW833, with the control system by the European automation control system supplier SigmaTek, the dry cycle time of the IML robot can be lower than 2.1s, which will perfecctly match the productivity of HMD270M8SPV.

90SEIIIA servo Injection Molding Machine

Machine Specification

Machine Dimension

Q & A