EL100/160 -- LK All Electric High Speed Injection Molding Machine and IML Application

Description	Unit	Value
Shot volume	cm³	79
Shot weight	g	72
Shot speed	mm/s	200
Screw diameter	mm	30
Injection pressure	MPa	205
Screw L:D ratio	--	19.6
CLAMPING UNIT
Clamping force	kN	1000
Opening Stroke	mm	360
Space between tie bars	mm x mm	465 x 405
Mold thickness(min)	mm	150
Mold thickness(max)	mm	510
Hydraulic ejection stroke	mm	100
Hydraulic ejection force	kN	25
POWER UNIT
Pump motor	kW	15
Heating capacity	kW	6.42
GENERAL
Oil tank capacity	L	0

Description

Unit

Value

INJECTION UNIT

Shot volume

cm³

Shot weight

Shot speed

mm/s

200

Screw diameter

Injection pressure

MPa

205

Screw L:D ratio

19.6

CLAMPING UNIT

Clamping force

1000

Opening Stroke

360

Space between tie bars

mm x mm

465 x 405

Mold thickness(min)

150

Mold thickness(max)

510

Hydraulic ejection stroke

100

Hydraulic ejection force

POWER UNIT

Pump motor

Heating capacity

6.42

GENERAL

Oil tank capacity

#	Value
A	4710 mm
B	717 mm
C	1219 mm
D	290 mm
E	1207 mm
F	291 mm
G	1500 mm
H	1960 mm
I	φ100 mm
J	φ2.6 mm

Value

4710 mm

717 mm

1219 mm

290 mm

1207 mm

291 mm

1500 mm

1960 mm

φ100 mm

φ2.6 mm

Q & A

Why is HMD270M8SPV One of the Best High Speed Hydraulic Injection Molding Machine for Small Size Containers IML Production?

As one of the best buy high speed hydraulic injection molding machine for thin-wall containers made in China, HMD270M8SPV is no doubt one an excellent injection molding machine for thin-wall containers high speed production. As the star injection molding machine by HMD group, HMD270M8SPV has the advangates below:

Improved platen with high rigidity structure, especially suitable for thin-wall containers IML production.
Parallel movement and high-speed/low pressure injection movement that shortens circle time, especially for thin wall products IML production.
High-speed hydraulic motor.
Opening stroke up to 560mm, suitable for the IML productions of containers with height up to 136mm.
Injection speed up to 368mm/s, with possible of a cycle time of IML production lower to 2s.

To match the excellent injection speed of HMD270M8SPV, the best IML robot would be SWITEK high speed side entry IML Robot SW833, with the control system by the European automation control system supplier SigmaTek, the dry cycle time of the IML robot can be lower than 2.1s, which will perfecctly match the productivity of HMD270M8SPV.

EL100/160C AllElectric Injection Molding Machine

Machine Specification

Machine Dimension

Q & A