EL130/260 -- LK All Electric High Speed Injection Molding Machine and IML Application

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	102
Shot weight	g	92
Shot speed	mm/s	200
Screw diameter	mm	32
Injection pressure	MPa	264
Screw L:D ratio	--	22
CLAMPING UNIT
Clamping force	kN	1300
Opening Stroke	mm	400
Space between tie bars	mm x mm	510 x 460
Mold thickness(min)	mm	150
Mold thickness(max)	mm	550
Hydraulic ejection stroke	mm	100
Hydraulic ejection force	kN	34
POWER UNIT
Pump motor	kW	18
Heating capacity	kW	8.22
GENERAL
Oil tank capacity	L	0

Platen Dimension

Machine Dimmension

#	Value
A	5292 mm
B	818 mm
C	1414 mm
D	310 mm
E	1260 mm
F	291 mm
G	1568 mm
H	2013 mm
I	φ100 mm
J	φ3 mm

Welltec put in market new all electric injection molding machine 550HD with PC/PMMA special plasticizing components for high end applications.

The new all electric injection molding machine 550HD was tested in the factory of Welltec in production of two cavities optical parts for automotive with a TOOLCEN injection robot. The new HD series large scale all electric injection molding machine by Welltec machinery is optimized for the production of light guide strips and thick wall light guides with high performance servo motors and precision ball screw to achieve a precisized injection of 0.01mm. And the product weight repeatability can be up to 1%, which is an ideal injection molding machine for PC/PMMA optical parts injection production.

The recommended robot for this injection molding machine would be SWITEK 3 axis servo injection robot SW6715DS which is a medium size servo robot with a payload up to 15kg and will provide reliable stability and repeat precision for the production of PC/PMMA optical parts. To further increase the productivity and quality of the optical parts, a runner cutting unit and optical vision control unit can also be introduced into the system to create a turn-key solution of optical parts production.

Turn-key IML Solutions