EL180/260 -- LK All Electric High Speed Injection Molding Machine and IML Application

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	78
Shot weight	g	70
Shot speed	mm/s	200
Screw diameter	mm	28
Injection pressure	MPa	345
Screw L:D ratio	--	22
CLAMPING UNIT
Clamping force	kN	1800
Opening Stroke	mm	470
Space between tie bars	mm x mm	560 x 560
Mold thickness(min)	mm	200
Mold thickness(max)	mm	600
Hydraulic ejection stroke	mm	120
Hydraulic ejection force	kN	34
POWER UNIT
Pump motor	kW	18
Heating capacity	kW	8.22
GENERAL
Oil tank capacity	L	0

Platen Dimension

Machine Dimmension

#	Value
A	5281 mm
B	818 mm
C	1414 mm
D	310 mm
E	1303 mm
F	291 mm
G	1611 mm
H	2056 mm
I	φ100 mm
J	φ3 mm

Heavy Duty 3 Axis Servo Injectiton Robot with Payload up to 75kg

NPE 2024 -- Yushin on show MKA series large robot with servo posture to demonstrate the flexibility and controllability in the production of large size plastic parts.

As a large robot with payload up to 50kg, the high light of the Yushin MKA Robot on show NPE 2024 not only with servo positure which enable the tools possible to turn 360° at any direction but also installed a quick change which enable the robot to change the different tools for the picking of different parts. This function is really powerful in some applications like parts picking + assembly. It'll enable the gantry robot to have the similar ability to a 6 axis servo industrial robot. It's amazing and we can see in NPE 2024 that not only Yushin but SPERO also demenstrated the same application with their large robot for the car parts industry.

As their follower, SW77 series of large robot produced by SWITEK Automation will also be able to be upgrade to a 6 axis servo injection robot with the pneumatic posture replaced by 3 axis servo posture + quick change. With a payload up to 75kg and support injection molding machine up to 4000T, SWITEK SW77 series robot is a price smart solution to production of large size plastic parts.

Turn-key IML Solutions