EL230/360 -- LK All Electric High Speed Injection Molding Machine and IML Application

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	146
Shot weight	g	132
Shot speed	mm/s	200
Screw diameter	mm	36
Injection pressure	MPa	250
Screw L:D ratio	--	22
CLAMPING UNIT
Clamping force	kN	2300
Opening Stroke	mm	550
Space between tie bars	mm x mm	610 x 610
Mold thickness(min)	mm	250
Mold thickness(max)	mm	680
Hydraulic ejection stroke	mm	150
Hydraulic ejection force	kN	52
POWER UNIT
Pump motor	kW	18
Heating capacity	kW	11.32
GENERAL
Oil tank capacity	L	0

Platen Dimension

Machine Dimmension

#	Value
A	5942 mm
B	959 mm
C	1529 mm
D	350 mm
E	1388 mm
F	301 mm
G	1696 mm
H	2152 mm
I	φ100 mm
J	φ3 mm

Welltec in house testing new all electric injection molding machine for medical application 190D with 48 cavities luer lock for syringe picked by Samfacc 3 Axis servo injection robot.

The new D series all electric injection molding machine by Welltec machinery is an injection molding machine designed for precise injection with high productivity. In this project it's producing the luer lock which is a protective cap for syringe. The total cycle time is 12s with robot and the weight of the part is 0.6g/pcs. With ultra rigid structure, the deformation at the hgihest pressure injection is ≤0.05mm with an injection repeatability of ±0.01mm.

In this application, the parts was picked with a Samfacc 3 axis servo Injection Robot. For an all electric injection molding machine, the robot selection can based on the size of the machine, the weight of the parts + EOAT, the total cycle time and the production environment requirement. The medical parts must be produced in a clean room, it'll request the robot to have suitable installation height, free from oil and dust during production and stability during picking and placing to ensure the precision of the parts. It's better to have the robot custom made for the project.

Turn-key IML Solutions