sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 163 |
| Shot weight | g | 147 |
| Shot speed | mm/s | 200 |
| Screw diameter | mm | 36 |
| Injection pressure | MPa | 266 |
| Screw L:D ratio | -- | 22 |
| CLAMPING UNIT | ||
| Clamping force | kN | 2300 |
| Opening Stroke | mm | 550 |
| Space between tie bars | mm x mm | 610 x 610 |
| Mold thickness(min) | mm | 250 |
| Mold thickness(max) | mm | 680 |
| Hydraulic ejection stroke | mm | 150 |
| Hydraulic ejection force | kN | 52 |
| POWER UNIT | ||
| Pump motor | kW | 24 |
| Heating capacity | kW | 11.32 |
| GENERAL | ||
| Oil tank capacity | L | 0 |
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 6107 mm |
| B | 1047 mm |
| C | 1576 mm |
| D | 380 mm |
| E | 1388 mm |
| F | 301 mm |
| G | 1746 mm |
| H | 2152 mm |
| I | φ100 mm |
| J | φ3 mm |
JetENgine showcase their new solutions of 2/4 cavities large size cups side entry IML production without vision control in Youtube.
The IML solution showcased is for the IML production of beverage cusp with a diameret 114 * 166 and two cavities cups with diameters of 193mm * 186mm which seems for the POP corn. Both cups have huge market potential and easy for a new comers to start their new IML container production business.
Backed by a huge market of "New Tea Beverage" market in mainland China, the IML solutions for the production of 750ml had been increased to 6/8 cavities at a cycle time around 8s. The main chain store of the "New Tea Beveragers" had been switching their cups from the traditional offprint technology to IML with the new SW8 Series IML Robot by SWITEK Automation.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
FCS Showcased Its New All Electric Injection Molding Machine CT-50E at TaiMold2023 With a 12 Cavities Centrifuge Tube Injection Solution
G3 Automation On Show New IML Solutions at Plastico Brasil 2023
SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
Lisong In House Testing Their New High Speed Hydraulic Injection Molding Machine LS280G
SWITEK New IML Robot for Multi-Cavities Containers is Under Going In House Testing
Dmeag is upgrading electric injection moulding systems for the surging market
SWITEK 2 Cavities IML Robot for 10L Bucket is Ready for Testing
A New Forza Series Two Platen Injection Molding Machine by Ningbo LK Technology Co., Ltd. Was Installed for the Production of Plastic Chairs.
IML Package -- A Perfect Substitution of Two Compartments IML Cups
Fakuma 2023 -- LK IMM On Show Serov & All Electric Injection Molding Machine
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right
