EL280/560 -- LK All Electric High Speed Injection Molding Machine and IML Application

Description	Unit	Value
Shot volume	cm³	286
Shot weight	g	260
Shot speed	mm/s	160
Screw diameter	mm	45
Injection pressure	MPa	196
Screw L:D ratio	--	22
CLAMPING UNIT
Clamping force	kN	2800
Opening Stroke	mm	600
Space between tie bars	mm x mm	730 x 730
Mold thickness(min)	mm	300
Mold thickness(max)	mm	750
Hydraulic ejection stroke	mm	150
Hydraulic ejection force	kN	60
POWER UNIT
Pump motor	kW	24
Heating capacity	kW	17.35
GENERAL
Oil tank capacity	L	0

Description

Unit

Value

INJECTION UNIT

Shot volume

cm³

286

Shot weight

260

Shot speed

mm/s

160

Screw diameter

Injection pressure

MPa

196

Screw L:D ratio

CLAMPING UNIT

Clamping force

2800

Opening Stroke

600

Space between tie bars

mm x mm

730 x 730

Mold thickness(min)

300

Mold thickness(max)

750

Hydraulic ejection stroke

150

Hydraulic ejection force

POWER UNIT

Pump motor

Heating capacity

17.35

GENERAL

Oil tank capacity

#	Value
A	6581 mm
B	1195 mm
C	1667 mm
D	430 mm
E	1463 mm
F	311 mm
G	1876 mm
H	2237 mm
I	φ100 mm
J	φ3 mm

Value

6581 mm

1195 mm

1667 mm

430 mm

1463 mm

311 mm

1876 mm

2237 mm

φ100 mm

φ3 mm

Q & A

Why is HMD270M8SPV One of the Best High Speed Hydraulic Injection Molding Machine for Small Size Containers IML Production?

As one of the best buy high speed hydraulic injection molding machine for thin-wall containers made in China, HMD270M8SPV is no doubt one an excellent injection molding machine for thin-wall containers high speed production. As the star injection molding machine by HMD group, HMD270M8SPV has the advangates below:

Improved platen with high rigidity structure, especially suitable for thin-wall containers IML production.
Parallel movement and high-speed/low pressure injection movement that shortens circle time, especially for thin wall products IML production.
High-speed hydraulic motor.
Opening stroke up to 560mm, suitable for the IML productions of containers with height up to 136mm.
Injection speed up to 368mm/s, with possible of a cycle time of IML production lower to 2s.

To match the excellent injection speed of HMD270M8SPV, the best IML robot would be SWITEK high speed side entry IML Robot SW833, with the control system by the European automation control system supplier SigmaTek, the dry cycle time of the IML robot can be lower than 2.1s, which will perfecctly match the productivity of HMD270M8SPV.

EL280/560B AllElectric Injection Molding Machine

Machine Specification

Machine Dimension

Q & A