High Speed Injection Moulding Machine HMD 308M8-SPV

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	530
Shot weight	g	482
Shot speed	mm/s	368
Screw diameter	mm	53
Injection pressure	MPa	177
Screw L:D ratio	--	23:1
CLAMPING UNIT
Clamping force	kN	3080
Opening Stroke	mm	600
Space between tie bars	mm x mm	615 x 585
Mold thickness(min)	mm	250
Mold thickness(max)	mm	550
Hydraulic ejection stroke	mm	100
Hydraulic ejection force	kN	77
POWER UNIT
Pump motor	kW	74
Heating capacity	kW	22.5
GENERAL
Oil tank capacity	L	380

Robot Installation

Platen Dimension

Machine Dimmension

#	Value
A	1983 mm
B	6267 mm
C	6557 mm
D	2381 mm
E	1641 mm

SWITEK finished the in house testing of two cavities juice extractor cover top entry IML system for the production of juice extractor covery by the technology of IML.

The new system is an economic solution for thick wall products IML production. With SWITEK 3 axis servo injection robot SW7312DS as the core injection robot to finish the process of label picking, insertion, parts picking, the cost of the top entry IML solutions is much lower than its side entry counter parts.

The tips for a top entry IML solutions:

To ensure that the robot has sufficient payload, it's the core of a stable IML system
To ensure that the mould design is friendly to IML production. The mould structure for IML is different from the mould for parts of non-IML, an excellent mould design is the key to a successful IML system.
A top entry IML system is only suitable for a low speed system. Because a top entry IML system request that the 3 axis servo robot to do all the label picking, inserting, parts picking and droping of an IML system, it'll request a much longer in mold time compared to its counter part.

Turn-key IML Solutions