HMD 368M8-SPV B -- High Speed Hydraulic Injection Moulding Machine Made in China

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	510
Shot weight	g	465
Shot speed	mm/s	400
Screw diameter	mm	57
Injection pressure	MPa	169
Screw L:D ratio	--	24.4:1
CLAMPING UNIT
Clamping force	kN	3680
Opening Stroke	mm	640
Space between tie bars	mm x mm	670 x 640
Mold thickness(min)	mm	270
Mold thickness(max)	mm	670
Hydraulic ejection stroke	mm	100
Hydraulic ejection force	kN	77
POWER UNIT
Pump motor	kW	90
Heating capacity	kW	28.5
GENERAL
Oil tank capacity	L	420

Robot Installation

Platen Dimension

Machine Dimmension

#	Value
A	1900 mm
B	7192 mm
C	7417 mm
D	2366 mm
E	1808 mm

SWITEK finished the in house testing of two cavities juice extractor cover top entry IML system for the production of juice extractor covery by the technology of IML.

The new system is an economic solution for thick wall products IML production. With SWITEK 3 axis servo injection robot SW7312DS as the core injection robot to finish the process of label picking, insertion, parts picking, the cost of the top entry IML solutions is much lower than its side entry counter parts.

The tips for a top entry IML solutions:

To ensure that the robot has sufficient payload, it's the core of a stable IML system
To ensure that the mould design is friendly to IML production. The mould structure for IML is different from the mould for parts of non-IML, an excellent mould design is the key to a successful IML system.
A top entry IML system is only suitable for a low speed system. Because a top entry IML system request that the 3 axis servo robot to do all the label picking, inserting, parts picking and droping of an IML system, it'll request a much longer in mold time compared to its counter part.

Turn-key IML Solutions