sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 641 |
| Shot weight | g | 590 |
| Shot speed | mm/s | 126 |
| Screw diameter | mm | 55 |
| Injection pressure | MPa | 154 |
| Screw L:D ratio | -- | 20 |
| CLAMPING UNIT | ||
| Clamping force | kN | 2500 |
| Opening Stroke | mm | 530 |
| Space between tie bars | mm x mm | 555 x 505 |
| Mold thickness(min) | mm | 220 |
| Mold thickness(max) | mm | 570 |
| Hydraulic ejection stroke | mm | 150 |
| Hydraulic ejection force | kN | 67 |
| POWER UNIT | ||
| Pump motor | kW | 28 |
| Heating capacity | kW | 14.52 |
| GENERAL | ||
| Oil tank capacity | L | 280 |
Platen Dimension
Machine Dimmension
New turn-key snack box + lids packing system started up with Hwamda hgih speed hydraulic injection molding machine and Shini injection robot and have the stacked snack boxs and lids picked by scara robot.
This is a typical injection automation application with two injection molding machines and robots, one injection molding machine/robot sets to produce the box and the other sets of injection molding machine/robot sets for lids with a SCARA robot as the transfer unit. The advantage of this solutions is it's simple and efficient for a small budget project.
To upgrade this system an optical vision control unit can be added to both side after the box and lids picked out from the injection molding machine to make sure that all the box and lids are quality products. Also for special requirem say snack box to be sold in supermarket a sticker labeling unit can be added to the system also.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
New PVC Pipe Fittings Runner Cutting System Was Installed In the Factory of LESSO Group-- The World Largest Pipe Fittings Manufacturer
Lisong In House Testing Their New High Speed Hydraulic Injection Molding Machine LS280G
NPE 2024 -- ARBURG Showcased BRINK 4 Cavities Cups IML Solutions with Vision Control
Welltec Test Their New All Electric Injection Molding Machine for Medical Parts 190D In House with 48 Cavities Luer Lock for Syringe
NPE 2024 -- Yushin On Show MKA Series Large Robot
Hwamda new turn-key snack box production system with packing started up with two high speed injection molding machine and Shini Robot
Zhafir Released Their 5th Generation of ZE Series High Speed All Electric Injection Molding Machine at Chinaplas 2023 with Tandem Mould
Eurasia Robotic 2 Cavites Buckets Side Entry IML System Installed
ENGEL All Electric Injection Molding Machine E-Motion 280T With IML System
Chinaplas 2023 News -- Golden Eagle is Showing New High Speed Hydraulic Injection Molding Machine
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right
