sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 618 |
| Shot weight | g | 562 |
| Shot speed | mm/s | 250 |
| Screw diameter | mm | 55 |
| Injection pressure | MPa | 180 |
| Screw L:D ratio | -- | 23 |
| CLAMPING UNIT | ||
| Clamping force | kN | 3500 |
| Opening Stroke | mm | 750 |
| Space between tie bars | mm x mm | 810 x 760 |
| Mold thickness(min) | mm | 240 |
| Mold thickness(max) | mm | 800 |
| Hydraulic ejection stroke | mm | 150 |
| Hydraulic ejection force | kN | 60 |
| POWER UNIT | ||
| Pump motor | kW | 156 |
| Heating capacity | kW | 0 |
| GENERAL | ||
| Oil tank capacity | L | 0 |
Robot Installation
Platen Dimension
Machine Dimmension
SA-290H is a high speed hydraulic energy-saving injection molding machine produced by FCS Machinery for the production of thin-wall food containers, bubble teacup and bubble teacup lids. The clamping force of this series of hydraulic high speed injection molding machine is range from 220Ton ~ 500T.
For thin-wall containers production, the efficiency of the system would be the key to your profit. Here I'll recommend the high speed 3 axis servo injection robot SW7112DS, with a dry cycle of 3.3s and payload up to 3kg, SW7112DS is an ideal robot for the high speed injection molding machine with a clamping force from 150Ton ~ 450Tons.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
BORCHE is On Showing New All Electric Injection Molding Machine at Chinaplas 2024 Booth#5.1D22
YIZUMI Will Showcase Their New All Electric Injection Molding Machine FF240M at IPF Japan 2023 from Nov.28~Dec.2 at Booth # 4-42610
Fakuma 2024 - - Nestal on Show Elion 1750 All Electric Injection Molding Machine with Turn-key IML Solutions
JetEngine New IML Robot Installed for 8 Cavities Cups IML Production
Arge Robotik Showcase New IML Robot for Rectangular Bucket 2 Cavities
Zhafir On Show Full Electric Solutions of Medical Package with New VE5 All Electric Injection Molding Machine
Arburg Show Case ULTIMATE ALL AROUNDER 720A with 4 Cavities Thin-wall Cups IML Solutions
Welltec Machinery In House Testing of Their New Two-tone Injection Molding Machine with 8 Cavities Closure Production
Chinaplas 2023 | SumitomoSHIDEMAG will Show up their Two Tone Injection Molding Machine
Haida представила на Руспласте новую гибридную термопластавтомат
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right
