sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 2798 |
| Shot weight | g | 2574 |
| Shot speed | mm/s | 118 |
| Screw diameter | mm | 90 |
| Injection pressure | MPa | 145 |
| Screw L:D ratio | -- | 19 |
| CLAMPING UNIT | ||
| Clamping force | kN | 5300 |
| Opening Stroke | mm | 850 |
| Space between tie bars | mm x mm | 860 x 800 |
| Mold thickness(min) | mm | 330 |
| Mold thickness(max) | mm | 850 |
| Hydraulic ejection stroke | mm | 210 |
| Hydraulic ejection force | kN | 123 |
| POWER UNIT | ||
| Pump motor | kW | 63 |
| Heating capacity | kW | 32 |
| GENERAL | ||
| Oil tank capacity | L | 600 |
Platen Dimension
Machine Dimmension
JH-WELLTEC Machine India Pvt. Ltd. on show Welltec new injection molding machine SEII 380 in production of one cavity chair without robot picking in exhibition to show the capacity of the injection molding machine.
In the demo show JH-WELLTEC Machine India Pvt. Ltd. chose a cold runner mold in production of the chair. The advantage of the cold runner mold is it's lower cost and easier for maintenance but will have a runner to be removed manually or automatically. In this show JH-WELLTEC Machine to have the chair free dropped and the runner removed manually. It's economic but not attracting to visitors in an exhibition.
To provide customer with a more efficient turn-key injection automation solution, the better choice would be to have the injection molding machine equipped with a SWITEK 3 axis servo injection robot SW6712DS-20 which has a payload up to 8kg and could be easilly programmed with EOAT sets to remove the runner automatically.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
Roboplas onshow IML Solutions of 4 cavities box 5 faces IML labeling with visual control and boxing
Welltec Machinery New Two Platen Injection Molding Machine 650JSEII Was Installed to the Customer Factory for the Production of 20L Paint Bucket
Zhafir open house with the thems of "Sharing Joy and Growing Together" on June 15th to show their cutting edge technology of all electric injection molding machine.
China Plastic Machinery News Express
YIZUMI Showed Up at IPF Japan 2023, Deputy General Manager Mrs. Karen Introduced Yizumi's Advantages and Strategy in Japanese Market.
Dmeag is upgrading electric injection moulding systems for the surging market
Arge Robotik 3 Axis Top Entry IML Robot Installed for the Production of 12L Rectangular IML Buckets.
BOLE Intelligent Machinery is Ready for Plast Eurasia Istanbul with a Turn-key Cutlery Injection Automation Solution
BORCHE On Show 660 US Ton Injection Molding Machine at NPE 2024
K-Fair 2022, NESSI & NEGRIBOSSI had a Joint Exhibition Show
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right
