sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 1539 |
| Shot weight | g | 1400 |
| Shot speed | mm/s | 145 |
| Screw diameter | mm | 70 |
| Injection pressure | MPa | 212 |
| Screw L:D ratio | -- | 24 |
| CLAMPING UNIT | ||
| Clamping force | kN | 5000 |
| Opening Stroke | mm | 1335 |
| Space between tie bars | mm x mm | 860 x 830 |
| Mold thickness(min) | mm | 265 |
| Mold thickness(max) | mm | 830 |
| Hydraulic ejection stroke | mm | 250 |
| Hydraulic ejection force | kN | 110 |
| POWER UNIT | ||
| Pump motor | kW | 52 |
| Heating capacity | kW | 25 |
| GENERAL | ||
| Oil tank capacity | L | 800 |
Platen Dimension
Machine Dimmension
New turn-key snack box + lids packing system started up with Hwamda hgih speed hydraulic injection molding machine and Shini injection robot and have the stacked snack boxs and lids picked by scara robot.
This is a typical injection automation application with two injection molding machines and robots, one injection molding machine/robot sets to produce the box and the other sets of injection molding machine/robot sets for lids with a SCARA robot as the transfer unit. The advantage of this solutions is it's simple and efficient for a small budget project.
To upgrade this system an optical vision control unit can be added to both side after the box and lids picked out from the injection molding machine to make sure that all the box and lids are quality products. Also for special requirem say snack box to be sold in supermarket a sticker labeling unit can be added to the system also.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
HaiTian Group ShowCased Their New High Speed Hydraulic Injection Molding Machine MA2700H at Indexpo - Madurai 2023
Hwamda new turn-key snack box production system with packing started up with two high speed injection molding machine and Shini Robot
Robin Dean, the CEO of Trade Group, Shared Her Opinions About NPE 2024
Sumitomo Onshow New All Electric Injection Molding Machine IntElect S220 With 4 Cavities Lids IML Solutions
Haitian On Show Turn-key IML Solutions of 6 Cavities Cups with MA3800F High Speed Injection Molding Machine
China Plastic Machinery News Express
A New 30 Cavities Work Drown Project Started with Hwamda High Speed Hydraulic Injection Molding Machine HMD 228M9 With Robot Picking
JetEngine Showcase New IML Solutions of 2/4 Cavities Cups Side Entry IML Production
Lisong Machinery Tested Their High Speed Hydraulic Injection Molding Machine with a 20L Bucket Mould
Eurasia Robotic Onshow 4 Cavities Box IML Solutions on Fakuma2023
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right
