sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 74 |
| Shot weight | g | 67 |
| Shot speed | mm/s | 350 |
| Screw diameter | mm | 28 |
| Injection pressure | MPa | 213 |
| Screw L:D ratio | -- | 20 |
| CLAMPING UNIT | ||
| Clamping force | kN | 1300 |
| Opening Stroke | mm | 400 |
| Space between tie bars | mm x mm | 470 x 470 |
| Mold thickness(min) | mm | 150 |
| Mold thickness(max) | mm | 500 |
| Hydraulic ejection stroke | mm | 100 |
| Hydraulic ejection force | kN | 30 |
| POWER UNIT | ||
| Pump motor | kW | 31 |
| Heating capacity | kW | 0 |
| GENERAL | ||
| Oil tank capacity | L | 0 |
Machine Dimension
Platen Dimension
New turn-key snack box + lids packing system started up with Hwamda hgih speed hydraulic injection molding machine and Shini injection robot and have the stacked snack boxs and lids picked by scara robot.
This is a typical injection automation application with two injection molding machines and robots, one injection molding machine/robot sets to produce the box and the other sets of injection molding machine/robot sets for lids with a SCARA robot as the transfer unit. The advantage of this solutions is it's simple and efficient for a small budget project.
To upgrade this system an optical vision control unit can be added to both side after the box and lids picked out from the injection molding machine to make sure that all the box and lids are quality products. Also for special requirem say snack box to be sold in supermarket a sticker labeling unit can be added to the system also.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
Chinapals 2023 | HMD Working with SWITEK for Higher Speed IML Solutions for Lids
Zhafir is Testing its High Speed All Electric Injection Molding Machine ZE2300F-830H With a 4 Cavities Yoghurt Cups Solutions
JetEngine New IML Robot for 2 Cavities 2 Compartment Cups In Production
Renowned Brands of Injection Molding Machines Made in China
A New Forza Series Two Platen Injection Molding Machine by Ningbo LK Technology Co., Ltd. Was Installed for the Production of Plastic Chairs.
The Worlds Top IML Solutions Provider BECK Automation Released There Precise Medical IML Solutions
YIZUMI On Show Cutting Edge Turn-key Injection Solutions at PLASTIMAGEN MEXICO 2023
Haitian Opened its Factory to Welcome Their Customers from Malaysia to Showcase Their Technology and Capacity in Injection Machinery Industry
Fakuma 2024 is Opening on 15 October, 2024 at Friedrichshafen, Germany
Yizumi Have Its Largest 8500T Two-Platen Injection Molding Machine Delivered to Customer
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right
