sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 129 |
| Shot weight | g | 117 |
| Shot speed | mm/s | 350 |
| Screw diameter | mm | 32 |
| Injection pressure | MPa | 259 |
| Screw L:D ratio | -- | 23 |
| CLAMPING UNIT | ||
| Clamping force | kN | 1300 |
| Opening Stroke | mm | 400 |
| Space between tie bars | mm x mm | 470 x 470 |
| Mold thickness(min) | mm | 150 |
| Mold thickness(max) | mm | 500 |
| Hydraulic ejection stroke | mm | 100 |
| Hydraulic ejection force | kN | 30 |
| POWER UNIT | ||
| Pump motor | kW | 35 |
| Heating capacity | kW | 0 |
| GENERAL | ||
| Oil tank capacity | L | 0 |
Machine Dimension
Platen Dimension
ARGE 3 axis servo top entry IML robot installed for the production of 20L IML paints bucket.
To reduce the cost of the IML system especially the injection molding machine, ARGE adopted a two step IML solutions simliar to which is popular among the top entry IML solutions for buckets by SWITEK which will have the buckets picking and labeling done asynchronous instead of synchronous to have the IML buckets produced by a smaller injection molding machine to reduce the investment of the machinery.
As an IML System provider since 2009, SWITEK Automation is continuing providing high performace IML Solutions of both top entry and side entry to clients around the world as a perfect subsition to low budget IML projects against the European IML solutions provider to make the small IML business profitable.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
YIZUMI On Show Cutting Edge Turn-key Injection Solutions at PLASTIMAGEN MEXICO 2023
FCS Released Its All-Electric Two Components Injection Molding Machine With a Production Demo of Air Tight Container
Roboplas Onshow 4 Cavities 280ml Tubs IML Solutions at Fakuma 2018
Arburg Released New Turn-key IML Solutions for Pharmaceutical Tubes IML Solutions
Chinapas 2024 -- ChenHsong Will Showcase New Injection Molding Machine at Booth #5.1C32
HaiTian Group ShowCased Their New High Speed Hydraulic Injection Molding Machine MA2700H at Indexpo - Madurai 2023
Lisong Machinery Started Its New High Speed Injection Molding Machine LS288G6 Up with a 32 Cavities Spoons Injection Solutions
China IML Solution Provider | Acmeplas System Technologies Ltd.
ENGEL On Show 4 Cavities 125ml PET/rPET Cups IML Solutions at K2022 With e-speed 280
Welltec Machinery PVC Special Injection Molding Machine Had Been Well Installed For Production
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right
