sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 422 |
| Shot weight | g | 384 |
| Shot speed | mm/s | 164 |
| Screw diameter | mm | 50 |
| Injection pressure | MPa | 203 |
| Screw L:D ratio | -- | 21 |
| CLAMPING UNIT | ||
| Clamping force | kN | 2500 |
| Opening Stroke | mm | 560 |
| Space between tie bars | mm x mm | 630 x 630 |
| Mold thickness(min) | mm | 220 |
| Mold thickness(max) | mm | 600 |
| Hydraulic ejection stroke | mm | 150 |
| Hydraulic ejection force | kN | 50 |
| POWER UNIT | ||
| Pump motor | kW | 60 |
| Heating capacity | kW | 0 |
| GENERAL | ||
| Oil tank capacity | L | 0 |
Machine Dimension
Platen Dimension
SA-330P is a servo hydraulic energy-saving injection molding machine by FCS Machinery which is suitable for the production of bucket container. This series of injection molding machine have a clamping force range from 220Tons ~ 1000Tons. In the video FCS is trying the production of disposable tablewares.
For the production of disposable tableware, there're a couple of solutions. The basic automatio solution would be to pick the table wares out with a high speed 3 axis injection robot SW7112DS; You can also choose to have it Single PCS Packed or have it Bag Packed or Box packed. With more than 17 years cooperating with the mold maker and injection molding machine manufacturers, SWITEK is experienced to provide you with a turn-key disposable tableware injection production solutions.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
Welltec Machinery On Show Turn-key 4 Cavities Yogurt Cups Side Entry IML Solutions with High Speed Servo Injection Molding Machine 283SEC
SWITEK New IML System for Bucket with Handle Assembly Started Up for Bulk Production
Chinaplas News | Demag Onshow New All Electric Injection Molding Machine
Haitian Group New JUPITER Series Two Platen Injection Molding Machine JU18500III Installed for EIPP Production
A New Forza Series Two Platen Injection Molding Machine by Ningbo LK Technology Co., Ltd. Was Installed for the Production of Plastic Chairs.
ENGEL On Show 4+4 Stack Mould Box Side Entry IML Solutions
Zhafir On Show Full Electric Solutions of Medical Package with New VE5 All Electric Injection Molding Machine
Chinaplas 2024 is Opening Soon, Are You Ready?
YIZUMI Showcased Its All Electric Multi-component Injection Molding Machine at VietnamPlas 2023
Chinaplas 2024 -- Yizumi Show Cased Turn-key 1L Pails 2 Cavities IML Solutions with Handle Assembly
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right
