Two Platen Injection Molding Machine FA2500 -- LK Technology Holidings Limited

Description	Unit	Value
Shot volume	cm³	14130
Shot weight	g	12858
Shot speed	mm/s	1628
Screw diameter	mm	150
Injection pressure	MPa	179
Screw L:D ratio	--	22
CLAMPING UNIT
Clamping force	kN	25000
Opening Stroke	mm	3000
Space between tie bars	mm x mm	1900 x 1700
Mold thickness(min)	mm	800
Mold thickness(max)	mm	1800
Hydraulic ejection stroke	mm	550
Hydraulic ejection force	kN	660
POWER UNIT
Pump motor	kW	288
Heating capacity	kW	112
GENERAL
Oil tank capacity	L	2500

Description

Unit

Value

INJECTION UNIT

Shot volume

cm³

14130

Shot weight

12858

Shot speed

mm/s

1628

Screw diameter

150

Injection pressure

MPa

179

Screw L:D ratio

CLAMPING UNIT

Clamping force

25000

Opening Stroke

3000

Space between tie bars

mm x mm

1900 x 1700

Mold thickness(min)

800

Mold thickness(max)

1800

Hydraulic ejection stroke

550

Hydraulic ejection force

660

POWER UNIT

Pump motor

288

Heating capacity

112

GENERAL

Oil tank capacity

2500

Platen Dimension

Machine Dimmension

#	Value
A	4357 mm
B	2216 mm
C	2141 mm
D	1964 mm
E	1964 mm
F	3800 mm
G	3000 mm
H	1579 mm
I	2232 mm
J	2232 mm
K	2185 mm
L	3611 mm
M	2326 mm
N	3345 mm

Q & A

What is a Picking Robot?

A picking robot in an injection project is a robotic arm which will pick the parts from the mould and have it placed on the conveyor or other automation system to have another processing. The projector will choose a picking robot according to the size of the injection molding machine, the injection cycle time, the weight of the parts etc to choose a picking robot.

High Speed Picking Robot SW7112DS

Take the SWITEK hgih speed 3 axis servo robot SW7112DS as an example, with a pay load of 2kg and a dry cycle time of 3.3s only designed for injection molding machine ranging from 150Ton ~ 500Tone, it could be regarded as one of the best picking robot for the thin-wall containers production business with a picking capacity up to 8 cavities of 700ml cups, but if for the picking of a bumper it would not be suitable. Anyway, to choose a picking robot for your injection project, the key point would be:

The size of your injection molding machine
The weight of the parts and EOAT
The total injection cycle
The height from the floor to the crane

FA2500 twoplaten Injection Molding Machine

Machine Specification

Machine Dimension

Q & A