sales06@switek.biz
+86 186 5927 5869
Description | Unit | Value |
---|---|---|
INJECTION UNIT | ||
Shot volume | cm3 | 1269 |
Shot weight | g | 1155 |
Shot speed | mm/s | 494 |
Screw diameter | mm | 70 |
Injection pressure | MPa | 189 |
Screw L:D ratio | -- | 22 |
CLAMPING UNIT | ||
Clamping force | kN | 4500 |
Opening Stroke | mm | 1300 |
Space between tie bars | mm x mm | 840 x 830 |
Mold thickness(min) | mm | 350 |
Mold thickness(max) | mm | 900 |
Hydraulic ejection stroke | mm | 250 |
Hydraulic ejection force | kN | 160 |
POWER UNIT | ||
Pump motor | kW | 74 |
Heating capacity | kW | 26 |
GENERAL | ||
Oil tank capacity | L | 1000 |
Platen Dimension
Machine Dimmension
# | Value |
---|---|
A | 2422 mm |
B | 1222 mm |
C | 1200 mm |
D | 1082 mm |
E | 1082 mm |
F | 1650 mm |
G | 1300 mm |
H | 1461 mm |
I | 2155 mm |
J | 1500 mm |
K | 1690 mm |
L | 2235 mm |
M | 2062 mm |
N | 2055 mm |
For a Container with a Height of 100mm, What Would be the Minimal Opening Stroke of the Injection Molding Machine?
As we know, for the IML production of a container, the robot will do the actions of parts picking and label inserting in the mold, which means that the system will request a much larger in mold space compared to non-IML production. While selecting an injection molding machine for your IML project, the opening stroke of the injection molding machine would be a very important parameter to be taken into consideration. The basic formular for the opening stoke caculation would be heigh of the parts x 3 + 150mm, the potential injection molding machine must have a larger opening stroke, or the robot may not able to pick the parts and insert the labels symtaneously.
Hot Injection Automation News
E-mail: sales@switek.biz
Contact Blogger
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China