sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 7964 |
| Shot weight | g | 7247 |
| Shot speed | mm/s | 106 |
| Screw diameter | mm | 130 |
| Injection pressure | MPa | 124 |
| Screw L:D ratio | -- | 18.5 |
| CLAMPING UNIT | ||
| Clamping force | kN | 11000 |
| Opening Stroke | mm | 1250 |
| Space between tie bars | mm x mm | 1170 x 1170 |
| Mold thickness(min) | mm | 500 |
| Mold thickness(max) | mm | 1250 |
| Hydraulic ejection stroke | mm | 320 |
| Hydraulic ejection force | kN | 246 |
| POWER UNIT | ||
| Pump motor | kW | 111 |
| Heating capacity | kW | 69.1 |
| GENERAL | ||
| Oil tank capacity | L | 1200 |
Platen Dimension
Machine Dimmension
New turn-key snack box + lids packing system started up with Hwamda hgih speed hydraulic injection molding machine and Shini injection robot and have the stacked snack boxs and lids picked by scara robot.
This is a typical injection automation application with two injection molding machines and robots, one injection molding machine/robot sets to produce the box and the other sets of injection molding machine/robot sets for lids with a SCARA robot as the transfer unit. The advantage of this solutions is it's simple and efficient for a small budget project.
To upgrade this system an optical vision control unit can be added to both side after the box and lids picked out from the injection molding machine to make sure that all the box and lids are quality products. Also for special requirem say snack box to be sold in supermarket a sticker labeling unit can be added to the system also.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
SWITEK Automation Showcased Cutlery Packing System at Chinaplas 2018
Welltec Machinery Turn-key 8+8 Petri Dish Side Entry Solution Tested In House With All Electric Injection Machine 360HD
Haida Finished the Injection Cycle of 26s in An IML Production of A 33L Paint Bucket with Its HD700U & SWITEK IML Robot SW850
BECK Automation Released Turn-key IML Solutions with Cardboard Boxes Loading Solutions
SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
SWITEK Engineer Finished the Installation of New Magazines in Chile
Chinaplas 2024 -- UVIA On Show All Electric Injection Molding Machine with CHUANY IML Robot
Yizumi On Show Their Turn-key 8 Cavities Pipe Fittings Auto-injection Solutions.
Eurasia Robotic Onshow 4 Cavities Box IML Solutions on Fakuma2023
Arburg Show Case ULTIMATE ALL AROUNDER 720A with 4 Cavities Thin-wall Cups IML Solutions
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right
