| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 9078 |
| Shot weight | g | 8170 |
| Shot speed | mm/s | 112 |
| Screw diameter | mm | 140 |
| Injection pressure | MPa | 142 |
| Screw L:D ratio | -- | 22.4 |
| CLAMPING UNIT | ||
| Clamping force | kN | 16000 |
| Opening Stroke | mm | 1600 |
| Space between tie bars | mm x mm | 1500 x 1415 |
| Mold thickness(min) | mm | 700 |
| Mold thickness(max) | mm | 1500 |
| Hydraulic ejection stroke | mm | 350 |
| Hydraulic ejection force | kN | 318 |
| POWER UNIT | ||
| Pump motor | kW | 181 |
| Heating capacity | kW | 101.85 |
| GENERAL | ||
| Oil tank capacity | L | 1800 |
Platen Dimension
Machine Dimmension
SA-290H is a high speed hydraulic energy-saving injection molding machine produced by FCS Machinery for the production of thin-wall food containers, bubble teacup and bubble teacup lids. The clamping force of this series of hydraulic high speed injection molding machine is range from 220Ton ~ 500T.
For thin-wall containers production, the efficiency of the system would be the key to your profit. Here I'll recommend the high speed 3 axis servo injection robot SW7112DS, with a dry cycle of 3.3s and payload up to 3kg, SW7112DS is an ideal robot for the high speed injection molding machine with a clamping force from 150Ton ~ 450Tons.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
K-Fair 2022, FANUC on Show Turn-key Bio Plastics Injection Solutions
LK On Show FORZA Two Platens Injection Molding Machine at K-Fair 2016 With Pails Side Entry IML Solution
Robin Dean, the CEO of Trade Group, Shared Her Opinions About NPE 2024
LiSong Machinery is testing their new specialized injection molding machine for PET LS170PET with a 12 cavities PET preform injection solution.
Chinaplas 2023 News | HMD IML Solutions, Borche Two Platen Injection Molding Machine, LEVEL New Plastic Dryer
Arburg Released New Turn-key IML Solutions for Pharmaceutical Tubes IML Solutions
Switek Finished the Testing of 6 Cavities Yogurt Cups Side Entry IML System with Yizumi PAC380K
Chinaplas 2024 -- Haitian Will Showcase their 5th Generation of Injection Molding Machine at Booth#5.1D32
Sumitomo (SHI) Demag Demonstrated Their New Hybrid Injection Molding Machine EL-Exis SP 250-920 with a Fast Cycle IML Production
BORCHE is On Showing New All Electric Injection Molding Machine at Chinaplas 2024 Booth#5.1D22
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right