HXF1600 -- Haixing High Precision Energy Saving Servo Injection Molding Machine

Description	Unit	Value
Shot volume	cm³	7827
Shot weight	g	7045
Shot speed	mm/s	112
Screw diameter	mm	130
Injection pressure	MPa	164
Screw L:D ratio	--	24.1
CLAMPING UNIT
Clamping force	kN	16000
Opening Stroke	mm	1600
Space between tie bars	mm x mm	1500 x 1415
Mold thickness(min)	mm	700
Mold thickness(max)	mm	1500
Hydraulic ejection stroke	mm	350
Hydraulic ejection force	kN	318
POWER UNIT
Pump motor	kW	181
Heating capacity	kW	101.85
GENERAL
Oil tank capacity	L	1800

Description

Unit

Value

INJECTION UNIT

Shot volume

cm³

7827

Shot weight

7045

Shot speed

mm/s

112

Screw diameter

130

Injection pressure

MPa

164

Screw L:D ratio

24.1

CLAMPING UNIT

Clamping force

16000

Opening Stroke

1600

Space between tie bars

mm x mm

1500 x 1415

Mold thickness(min)

700

Mold thickness(max)

1500

Hydraulic ejection stroke

350

Hydraulic ejection force

318

POWER UNIT

Pump motor

181

Heating capacity

101.85

GENERAL

Oil tank capacity

1800

Q & A

For Thin Wall Container IML Production, Will YIZUME P250E or P250K3 a Better Choice for Your Project?

As for which injection molding machine is a better choice for your IML project, it'll depends on your budget and requirement about the parts. As we know both P250E and P280K3 are excellent high speed injection molding machine designed for the injection production of thin wall containers with high injection speed for the fast injection of thin wall containers. They're no dobt excellent injection molding machine for your IML project. But, how to make a decision between?

Both P250E and P250K3 has similar injection speed (300/500 mm/s optional for P250E and 320mm/s for P250K3) but P250E is an all electric injection molding machine while P250K3 is a high speed hydraulic injection molding machine. Of course an all electric injection molding machine is a better choice for food container IML production, but, the cost of it would be much higher than P250K3. So, if your budget is sufficient, P250E, if not, P250K3 would be the right one for you.

The IML robot for YIZUMI P250K3/P250E would be SWITEK IML Robot SW833. In K2019 SWITEK IML robot SW833 work with P250E in demo of 4 cavities cups at the cycle time of 2.1s, this combination is one of the best IML solution for small size containers IML production.

HXF1600-B Servo Injection Molding Machine

Machine Specification

Machine Dimension

Q & A