sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 37071 |
| Shot weight | g | 33734 |
| Shot speed | mm/s | 77 |
| Screw diameter | mm | 200 |
| Injection pressure | MPa | 134 |
| Screw L:D ratio | -- | 20 |
| CLAMPING UNIT | ||
| Clamping force | kN | 30000 |
| Opening Stroke | mm | 2000 |
| Space between tie bars | mm x mm | 2000 x 1750 |
| Mold thickness(min) | mm | 800 |
| Mold thickness(max) | mm | 1900 |
| Hydraulic ejection stroke | mm | 480 |
| Hydraulic ejection force | kN | 430 |
| POWER UNIT | ||
| Pump motor | kW | 264 |
| Heating capacity | kW | 178 |
| GENERAL | ||
| Oil tank capacity | L | 2200 |
Platen Dimension
Machine Dimmension
Arburg show cased its all electric injection molding machine "ULTIMATE ALL AROUNDER 720A" with a 4 cavities thin-wall cups IML solution at the total cycle time of 3.95second.
The new all electric packaging machine can produce IML thin-wall cups with a wall thickness of just 0.37 millimetres. Besides this, a variety of new technic applied to the new system. Driven with all-electric and working in combination with injection compression moulding, the energy footprint could be improved by 20 percent and the component weight has dropped significantly from 13 to 10.8grams. With the special "next Cycle IML" technology, the label on the IML product can be completely separated from the cup's PP during recycling.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
Arge Double Arms Top Entry IML Systems for Buckets
Chinaplas 2024 -- BOLE Machinery On Show New All Electric Injection Molding Machines at Booth #4.1D24
ENGEL All Electric Injection Molding Machine E-Motion 280T With IML System
Chinaplas 2023 | Lisong Will Onshow Their New All Electric Injection Molding Machine
Chinapas 2024 -- ChenHsong Will Showcase New Injection Molding Machine at Booth #5.1C32
Eurasia Robotic 6 Cavities IML Solutions with Vision Control
PowerJet Machinery Finished the Installation of Their New Two Platen Injection Molding Machine
WETEC Showcased IML Solutions of 4 Cavities Cups at the Cycle Time of 2.9s
Lisong Machinery Is Testing Their New High Speed Hydraulic Injection Molding Machine With a 4 Cavities Lids Side Entry IML Solution
Lisong Machinery Started Its New High Speed Injection Molding Machine LS288G6 Up with a 32 Cavities Spoons Injection Solutions
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right
