| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 735 |
| Shot weight | g | 661 |
| Shot speed | mm/s | 97 |
| Screw diameter | mm | 60 |
| Injection pressure | MPa | 219 |
| Screw L:D ratio | -- | 21.7 |
| CLAMPING UNIT | ||
| Clamping force | kN | 3200 |
| Opening Stroke | mm | 640 |
| Space between tie bars | mm x mm | 685 x 685 |
| Mold thickness(min) | mm | 250 |
| Mold thickness(max) | mm | 690 |
| Hydraulic ejection stroke | mm | 160 |
| Hydraulic ejection force | kN | 70 |
| POWER UNIT | ||
| Pump motor | kW | 45 |
| Heating capacity | kW | 24.2 |
| GENERAL | ||
| Oil tank capacity | L | 510 |
Platen Dimension
Machine Dimmension
SA-290H is a high speed hydraulic energy-saving injection molding machine produced by FCS Machinery for the production of thin-wall food containers, bubble teacup and bubble teacup lids. The clamping force of this series of hydraulic high speed injection molding machine is range from 220Ton ~ 500T.
For thin-wall containers production, the efficiency of the system would be the key to your profit. Here I'll recommend the high speed 3 axis servo injection robot SW7112DS, with a dry cycle of 3.3s and payload up to 3kg, SW7112DS is an ideal robot for the high speed injection molding machine with a clamping force from 150Ton ~ 450Tons.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
Chinaplas 2024 is Opening Soon, Are You Ready?
Haitian Celebrate the Opening of HaiTian Turkey Application Center
Chinaplas 2023 | YanHign Group Will Onshow Their New Hybrid Tow-platen Injection Moulding Machine
Ambiente Plastico Interviewed Haitian Group at Plastimagen 2023 in Mexico
CHINAPLAS 2023 | Powerjet will Onshow New Solutions of PET Proform and Packages
PowerJet Machinery Finished the Installation of Their New Two Platen Injection Molding Machine
Hwamda Machinery 2500T Two Platen Injection Molding Machine HMD 2500DU Started Up for Plastic Pallet Production
The Assembly of SWITEK New IML Robot for Wrap + Bottom Labeling Finished
ENGEL All Electric Injection Molding Machine E-Motion 280T With IML System
Chinapls 2023 | HaiTian will Bring New Injection Molding Technology for Global Visitors
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right