sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 1000 |
| Shot weight | g | 900 |
| Shot speed | mm/s | 97 |
| Screw diameter | mm | 70 |
| Injection pressure | MPa | 161 |
| Screw L:D ratio | -- | 18.6 |
| CLAMPING UNIT | ||
| Clamping force | kN | 3600 |
| Opening Stroke | mm | 690 |
| Space between tie bars | mm x mm | 720 x 670 |
| Mold thickness(min) | mm | 260 |
| Mold thickness(max) | mm | 700 |
| Hydraulic ejection stroke | mm | 180 |
| Hydraulic ejection force | kN | 125 |
| POWER UNIT | ||
| Pump motor | kW | 45 |
| Heating capacity | kW | 24.2 |
| GENERAL | ||
| Oil tank capacity | L | 510 |
Platen Dimension
Machine Dimmension
Arburg show cased its all electric injection molding machine "ULTIMATE ALL AROUNDER 720A" with a 4 cavities thin-wall cups IML solution at the total cycle time of 3.95second.
The new all electric packaging machine can produce IML thin-wall cups with a wall thickness of just 0.37 millimetres. Besides this, a variety of new technic applied to the new system. Driven with all-electric and working in combination with injection compression moulding, the energy footprint could be improved by 20 percent and the component weight has dropped significantly from 13 to 10.8grams. With the special "next Cycle IML" technology, the label on the IML product can be completely separated from the cup's PP during recycling.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
Lisong Machinery Tested Their High Speed Hydraulic Injection Molding Machine with a 20L Bucket Mould
Roboplas Onshow 4 Cavities Boxex 5 Faces IML Solution at Plastpol 2013
BOLE Intelligent Machinery is Ready for Plast Eurasia Istanbul with a Turn-key Cutlery Injection Automation Solution
SW7112DS - The Best Buy High Speed Injection Robot for Thin-wall Containers
Arge Robotik New 3 Axis Top Entry IML Robot Installed to the Lisong Injection Molding Machine for the Production of 20L IML Buckets
JH-Welltec Machine India Pvt. Ltd. On Show Their New Servo Machine SEII 380 In Chair Production without Robot
Why is An IML Package Regarded an Eco-friendly Package?
SWITEK Engineer Finished the Installation of New Magazines in Chile
A New Forza Series Two Platen Injection Molding Machine by Ningbo LK Technology Co., Ltd. Was Installed for the Production of Plastic Chairs.
K-2022, Zhafir On Show Jenius Series Hybrid Injection Molding Machine
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right
