sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 4274 |
| Shot weight | g | 3847 |
| Shot speed | mm/s | 123 |
| Screw diameter | mm | 110 |
| Injection pressure | MPa | 118 |
| Screw L:D ratio | -- | 18 |
| CLAMPING UNIT | ||
| Clamping force | kN | 6500 |
| Opening Stroke | mm | 920 |
| Space between tie bars | mm x mm | 930 x 880 |
| Mold thickness(min) | mm | 400 |
| Mold thickness(max) | mm | 950 |
| Hydraulic ejection stroke | mm | 250 |
| Hydraulic ejection force | kN | 210 |
| POWER UNIT | ||
| Pump motor | kW | 84 |
| Heating capacity | kW | 50.9 |
| GENERAL | ||
| Oil tank capacity | L | 900 |
Platen Dimension
Machine Dimmension
JH-WELLTEC Machine India Pvt. Ltd. on show Welltec new injection molding machine SEII 380 in production of one cavity chair without robot picking in exhibition to show the capacity of the injection molding machine.
In the demo show JH-WELLTEC Machine India Pvt. Ltd. chose a cold runner mold in production of the chair. The advantage of the cold runner mold is it's lower cost and easier for maintenance but will have a runner to be removed manually or automatically. In this show JH-WELLTEC Machine to have the chair free dropped and the runner removed manually. It's economic but not attracting to visitors in an exhibition.
To provide customer with a more efficient turn-key injection automation solution, the better choice would be to have the injection molding machine equipped with a SWITEK 3 axis servo injection robot SW6712DS-20 which has a payload up to 8kg and could be easilly programmed with EOAT sets to remove the runner automatically.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
Lisong In House Testing Their New High Speed Hydraulic Injection Molding Machine LS280G
ARGE Side Entry IML System for 1200cc Buckets In Production with BMBKW28 Injection Molding Machine
Haida Finished the Injection Cycle of 26s in An IML Production of A 33L Paint Bucket with Its HD700U & SWITEK IML Robot SW850
ARGE Declared to Have 6s Top Entry IML Robot for 2 Cavities 2 Litter Pail Buckets
Robin Dean, the CEO of Trade Group, Shared Her Opinions About NPE 2024
Lisiong New PVC Special Injection Molding Machine LS220PVC Installed for Commander Box Production
CHINAPLAS 2023 | Chinaplas High Speed Injection Molding Machine Manufacturer HMD will Unveil New High Speed All Electric Injection Molding Machine
Haitian On Show Turn-key IML Solutions of 6 Cavities Cups with MA3800F High Speed Injection Molding Machine
Roboplas Onshow 4 Cavities 280ml Tubs IML Solutions at Fakuma 2018
FCS Released Its New All Electrics Injection Molding Machine with 12 Cavities Side Entry IML Solutions
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right
