sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 3611 |
| Shot weight | g | 3250 |
| Shot speed | mm/s | 106 |
| Screw diameter | mm | 100 |
| Injection pressure | MPa | 184 |
| Screw L:D ratio | -- | 22 |
| CLAMPING UNIT | ||
| Clamping force | kN | 8000 |
| Opening Stroke | mm | 1040 |
| Space between tie bars | mm x mm | 1002 x 1002 |
| Mold thickness(min) | mm | 400 |
| Mold thickness(max) | mm | 1030 |
| Hydraulic ejection stroke | mm | 280 |
| Hydraulic ejection force | kN | 186 |
| POWER UNIT | ||
| Pump motor | kW | 96 |
| Heating capacity | kW | 56.1 |
| GENERAL | ||
| Oil tank capacity | L | 1000 |
Platen Dimension
Machine Dimmension
Arge Automation double arms top entry IML solutions for 1 cavity bucket synchronous IML production
For double arms top entry IML solutions it's mostly a solution for the production of IML Lids to have a synchronous parts picking and labeling for a higher production efficiency but not increase the size of the injection molding machine too much. To have a double arms top entry IML solution for the production of IML bucket is a brave adenture in system design because an injection molding machine with sufficient opening stroke will increase the cost of the system dramatically.
A better solution for efficient IML production of IML production would be a Side Entry IML Robot which will have a much better consistence of the parts and much shorter in mold time for a higher productivity. Any, ARGE have a double arms top entry IML robot for the production of IML buckets is a new try and provide more opportunities to the small and medium size IML buckets producers.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
JetEngine New IML Robot Installed for 8 Cavities Cups IML Production
FCS High Speed Hydraulic Injection Molding Machine SA-290H 2 Cavities Thin-wall Food Container Production
Welltec Machinery In House Testing of Their New Two-tone Injection Molding Machine with 8 Cavities Closure Production
Haida Finished the Injection Cycle of 26s in An IML Production of A 33L Paint Bucket with Its HD700U & SWITEK IML Robot SW850
ENGEL On Show 4+4 Stack Mould Box Side Entry IML Solutions
SWITEK 2 Cavities IML Robot for 10L Bucket is Ready for Testing
Haitian New 2 Cavities 1L Containers IML Solution Started Up with Zhafir ZE3000F Hybrid Injection Molding Machine
Arge Top Entry IML for 20L Paint Bucket IML Productions
Fakuma 2024 - - Nestal on Show Elion 1750 All Electric Injection Molding Machine with Turn-key IML Solutions
Haida представила на Руспласте новую гибридную термопластавтомат
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right
