sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 6217 |
| Shot weight | g | 5658 |
| Shot speed | mm/s | 975 |
| Screw diameter | mm | 120 |
| Injection pressure | MPa | 152 |
| Screw L:D ratio | -- | 20.2 |
| CLAMPING UNIT | ||
| Clamping force | kN | 10000 |
| Opening Stroke | mm | 1230 |
| Space between tie bars | mm x mm | 1160 x 1160 |
| Mold thickness(min) | mm | 450 |
| Mold thickness(max) | mm | 1160 |
| Hydraulic ejection stroke | mm | 320 |
| Hydraulic ejection force | kN | 22 |
| POWER UNIT | ||
| Pump motor | kW | 138 |
| Heating capacity | kW | 58.4 |
| GENERAL | ||
| Oil tank capacity | L | 1050 |
Platen Dimension
Arge Automation double arms top entry IML solutions for 1 cavity bucket synchronous IML production
For double arms top entry IML solutions it's mostly a solution for the production of IML Lids to have a synchronous parts picking and labeling for a higher production efficiency but not increase the size of the injection molding machine too much. To have a double arms top entry IML solution for the production of IML bucket is a brave adenture in system design because an injection molding machine with sufficient opening stroke will increase the cost of the system dramatically.
A better solution for efficient IML production of IML production would be a Side Entry IML Robot which will have a much better consistence of the parts and much shorter in mold time for a higher productivity. Any, ARGE have a double arms top entry IML robot for the production of IML buckets is a new try and provide more opportunities to the small and medium size IML buckets producers.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
Fakuma 2023 -- See What's the Expectation of Spetztekhosnastka Ltd. the Exhibitor of Fakuma from Ukaraine
FCS Machinery Showcased Top Entry IML Solution by All Electric Injection Molding Machine
Welltec Machinery PVC Special Injection Molding Machine Had Been Well Installed For Production
Chinaplas 2024 -- Yizumi Will Showcase Cutting Edge Injection Solutions at Booth #4.1D32
Chinaplas2024 -- Wittmann Will Show Up New Robotic Technology at Booth#4.1D41
Chinaplas 2024 -- Yizumi Show Cased Turn-key 1L Pails 2 Cavities IML Solutions with Handle Assembly
NPE 2024, ChenHsong Machinery On Show Turn-key IML Solutions
Roboplas Top Entry IML Robot Installed 1 Cavity Pail
SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
HAITIAN Group On Show it's High Precision Injection Solutions With ZHAFIR All Electric Injection Molding Machine
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right
