sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 341 |
| Shot weight | g | 310 |
| Shot speed | mm/s | 170 |
| Screw diameter | mm | 46 |
| Injection pressure | MPa | 147 |
| Screw L:D ratio | -- | 18.7 |
| CLAMPING UNIT | ||
| Clamping force | kN | 1280 |
| Opening Stroke | mm | 380 |
| Space between tie bars | mm x mm | 410 x 410 |
| Mold thickness(min) | mm | 150 |
| Mold thickness(max) | mm | 450 |
| Hydraulic ejection stroke | mm | 120 |
| Hydraulic ejection force | kN | 4 |
| POWER UNIT | ||
| Pump motor | kW | 17 |
| Heating capacity | kW | 10.3 |
| GENERAL | ||
| Oil tank capacity | L | 200 |
Platen Dimension
JH-WELLTEC Machine India Pvt. Ltd. on show Welltec new injection molding machine SEII 380 in production of one cavity chair without robot picking in exhibition to show the capacity of the injection molding machine.
In the demo show JH-WELLTEC Machine India Pvt. Ltd. chose a cold runner mold in production of the chair. The advantage of the cold runner mold is it's lower cost and easier for maintenance but will have a runner to be removed manually or automatically. In this show JH-WELLTEC Machine to have the chair free dropped and the runner removed manually. It's economic but not attracting to visitors in an exhibition.
To provide customer with a more efficient turn-key injection automation solution, the better choice would be to have the injection molding machine equipped with a SWITEK 3 axis servo injection robot SW6712DS-20 which has a payload up to 8kg and could be easilly programmed with EOAT sets to remove the runner automatically.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
The Assembly of SWITEK New IML Robot for Wrap + Bottom Labeling Finished
A New 30 Cavities Work Drown Project Started with Hwamda High Speed Hydraulic Injection Molding Machine HMD 228M9 With Robot Picking
NPE 2024 -- WITTMANN On Show Solutions to Demonstrate "IT's All WITTMANN
What Would be the Reaction of a First-Timers Who is Visiting NPE 2024 for the First Time
Chinaplas 2024 -- Sumitomo Demag will On Show New All Electric Injection Molding Machine at Booth#4.1C32
JetEngine Showcase New IML Solutions of 2/4 Cavities Cups Side Entry IML Production
Welltec Machinery Turn-key 8+8 Petri Dish Side Entry Solution Tested In House With All Electric Injection Machine 360HD
FCS Servo Injection Molding Machine SA-330P Disposable Tableware Injection Production Solutions
Arge Top Entry IML Robot With Pails Dropped Freely
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right
