sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 8623 |
| Shot weight | g | 7847 |
| Shot speed | mm/s | 1215 |
| Screw diameter | mm | 130 |
| Injection pressure | MPa | 176 |
| Screw L:D ratio | -- | 22 |
| CLAMPING UNIT | ||
| Clamping force | kN | 14000 |
| Opening Stroke | mm | 1500 |
| Space between tie bars | mm x mm | 1450 x 1350 |
| Mold thickness(min) | mm | 650 |
| Mold thickness(max) | mm | 1400 |
| Hydraulic ejection stroke | mm | 400 |
| Hydraulic ejection force | kN | 35 |
| POWER UNIT | ||
| Pump motor | kW | 206 |
| Heating capacity | kW | 77.6 |
| GENERAL | ||
| Oil tank capacity | L | 1750 |
Platen Dimension
JH-WELLTEC Machine India Pvt. Ltd. on show Welltec new injection molding machine SEII 380 in production of one cavity chair without robot picking in exhibition to show the capacity of the injection molding machine.
In the demo show JH-WELLTEC Machine India Pvt. Ltd. chose a cold runner mold in production of the chair. The advantage of the cold runner mold is it's lower cost and easier for maintenance but will have a runner to be removed manually or automatically. In this show JH-WELLTEC Machine to have the chair free dropped and the runner removed manually. It's economic but not attracting to visitors in an exhibition.
To provide customer with a more efficient turn-key injection automation solution, the better choice would be to have the injection molding machine equipped with a SWITEK 3 axis servo injection robot SW6712DS-20 which has a payload up to 8kg and could be easilly programmed with EOAT sets to remove the runner automatically.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
A New Forza Series Two Platen Injection Molding Machine by Ningbo LK Technology Co., Ltd. Was Installed for the Production of Plastic Chairs.
Haitian New 2 Cavities 1L Containers IML Solution Started Up with Zhafir ZE3000F Hybrid Injection Molding Machine
Ningbo LK Technology Co., ltd. Inhouse Testing Their New Forza Two-platen Injection Molding Machine with IML Solutions
PowerJet Machinery Finished the Installation of Their New Two Platen Injection Molding Machine
Chinaplas 2024 -- Sumitomo Demag will On Show New All Electric Injection Molding Machine at Booth#4.1C32
Roboplas onshow 1 cavity cup top entry IML Solution at K2022 by Arburg Allround all electric injection molding machine.
BORCHE is On Showing New All Electric Injection Molding Machine at Chinaplas 2024 Booth#5.1D22
FCS High Speed Hydraulic Injection Molding Machine SA-290H 2 Cavities Thin-wall Food Container Production
K-Fair 2022, Highlights on Hall 15
NPE 2024 -- Spero On Show EOAT Quick Change Technology By Their Heavy Duty Injection Robot with Servo A/C Axis
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right
