sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 552 |
| Shot weight | g | 502 |
| Shot speed | mm/s | 216 |
| Screw diameter | mm | 52 |
| Injection pressure | MPa | 186 |
| Screw L:D ratio | -- | 21 |
| CLAMPING UNIT | ||
| Clamping force | kN | 2080 |
| Opening Stroke | mm | 510 |
| Space between tie bars | mm x mm | 530 x 530 |
| Mold thickness(min) | mm | 180 |
| Mold thickness(max) | mm | 550 |
| Hydraulic ejection stroke | mm | 150 |
| Hydraulic ejection force | kN | 7 |
| POWER UNIT | ||
| Pump motor | kW | 30 |
| Heating capacity | kW | 16.6 |
| GENERAL | ||
| Oil tank capacity | L | 330 |
Platen Dimension
SA-290H is a high speed hydraulic energy-saving injection molding machine produced by FCS Machinery for the production of thin-wall food containers, bubble teacup and bubble teacup lids. The clamping force of this series of hydraulic high speed injection molding machine is range from 220Ton ~ 500T.
For thin-wall containers production, the efficiency of the system would be the key to your profit. Here I'll recommend the high speed 3 axis servo injection robot SW7112DS, with a dry cycle of 3.3s and payload up to 3kg, SW7112DS is an ideal robot for the high speed injection molding machine with a clamping force from 150Ton ~ 450Tons.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
ไอเอ็มแอล เทคโนโลยี เอ็กซ์เพรส
Eurasia Robotic Onshow 4 Cavities Box IML Solutions on Fakuma2023
Lisong Machinery Started Its New High Speed Injection Molding Machine LS288G6 Up with a 32 Cavities Spoons Injection Solutions
YIZUMI Showcased Its All Electric Multi-component Injection Molding Machine at VietnamPlas 2023
Arburg Show Case ULTIMATE ALL AROUNDER 720A with 4 Cavities Thin-wall Cups IML Solutions
Ningbo LK Technology Co., ltd. Inhouse Testing Their New Forza Two-platen Injection Molding Machine with IML Solutions
FCS Machinery Showcased Top Entry IML Solution by All Electric Injection Molding Machine
Focus on circular economy, YIZUMI machinery is promoting their all electric injection molding machine to minimize the per kg power consumption.
YIZUMI Officially Opened Its New India Factory in Gujarat on October 07, 2022
Absolute Group of Companies On Show 4 Cavities Medical Container by Haitian/Zhafir ZE1500 at Plastec West 2020
ENGEL On Show 4+4 Stack Mould Box Side Entry IML Solutions
Contact SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right
